Spiral Point Tap, Thread Size #0-80, UNF, Overall Length 40 mm, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 8 mm, 75 Percent Thread Drill Size 1.20 mm, Thread Limit H1/H2, Class of Fit JIS 2, Number of Flutes 2
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 1/8 in |
| Tap Material | High Speed Steel |
| Tap Dimension Type | Inch |
| Tap Chamfer | Taper |
| Tap Size | #0 |
| Tap Style | Spiral Point |
| Overall Length | 1-9/16 in |
| Number of Flutes | 2 |
| Thread Length | 5/16 in |
| Tap Thread Type | UNF |
| Thread Direction | Right Hand |
| Tap Finish | Bright |
| Tap Thread Size | #0-80 |
| Cutting Direction - Machining | Right Hand |
| Spiral Direction | Neutral |
| Primary Material Application | Steel |
| 65% Thread Drill Size | 1.25 mm |
| Coolant Fed | Non-Coolant Through |
| Threads per Inch | 80 |
| Series | Prototex X·pert P |
| Shank Length | 32 mm |
| Square Size | 2.1 mm |
| Thread Standard | UNF |
| Class of Fit | JIS 2 |
| Thread Limit | H2, H1 |
| Shank Type - Machining | Straight |
| Primary Material Application ISO Code | P |
| 75% Thread Drill Size | 1.2 mm |
| Secondary Material Application | Aluminum, Brass, Bronze, Copper |
| Measurement System | Pipe |
| Extended Neck | No |
| Secondary Material Application ISO Code | N, O |
| Thread Size | #0-80 |
| Drill Bit Size | 0.049 in |
| 55% Thread Drill Size | 1.3 mm |
| Helix Angle | 0 deg |
| List Number | P23210 |
| Number of Pieces | 1 |
| Pitch Diameter Limit | 2B |
| Square Length | 2.1 mm |
| Shank Diameter | 2.5 mm |
| Shank Type | Straight |
| Square Width | 2.1 mm |
| Wire Rope Length | 40 mm |
| Length | 40 mm |
| Country of Origin (subject to change) | Germany |
| Package Quantity | 1 |