Jobber Length Drill Bit, Drill Bit Size 7/16 in, Drill Bit Point Angle 118 Degrees , High Speed Steel, Bright (Uncoated), Decimal Equivalent 0.4375, Fractional Inch, Drill Bit Point Type Conical Point, Non-Coolant Through
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 142 mm |
| Drill Bit Point Angle | 118 deg |
| Drill Bit Size | 7/16 in |
| Number of Flutes | 2 |
| Shank Dia. | 11.1 mm |
| Material - Machining | High Speed Steel |
| Cutting Direction | Right Hand |
| Finish - Machining | Bright |
| Shank Type - Machining | Straight |
| Depth:Dia. Ratio | 8 xD |
| List Number | A1211 |
| Flute Type | Spiral |
| Standards | DIN 338 |
| Decimal Equivalent | 0.4375 |
| Application | For Cast Iron, Steel |
| Number of Pieces | 1 |
| Flute Length | 94 mm |
| Drill Bit Dimension Type | Fractional Inch |
| Coolant Fed | Non-Coolant Through |
| Drilling Depth | 76 mm |
| Shank Length | 48 mm |
| Primary Material Application | Cast Iron, Steel |
| Drill Length Class | Jobber-Length |
| Drill Point Length | 3.34 mm |
| Secondary Material Application | Aluminum, Brass, Bronze, Composite, Copper, Graphite, Nickel, Stainless Steel, Titanium |
| Sheeter Drill | No |
| Material Grade - Machining | General Purpose |
| Drill Bit Point Type | Conical Point |
| Measurement System | Fractional Inch |
| Series | N |
| Primary Material Application ISO Code | P, K |
| Secondary Material Application ISO Code | N, M, S, O |
| Drill Diameter Tolerance | H8 |
| Maximum Drilling Depth | 94 mm |
| Wire Rope Length | 142 mm |
| Length | 142 mm |
| Country of Origin (subject to change) | Brazil |
| Package Quantity | 1 |