Jobber Length Drill Bit, Drill Bit Size 4.6 mm, Drill Bit Point Angle 130 Degrees , High Speed Steel, Bright (Uncoated), Decimal Equivalent 0.1811, Metric, Drill Bit Point Type Conical Point, Non-Coolant Through
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 80 mm |
| Drill Bit Point Angle | 130 deg |
| Drill Bit Size | 4.6 mm |
| Number of Flutes | 2 |
| Shank Dia. | 4.6 mm |
| Material - Machining | High Speed Steel |
| Cutting Direction | Right Hand |
| Finish - Machining | Bright |
| Shank Type - Machining | Straight |
| Number of Pieces | 1 |
| Application | Stainless Steel, Super Alloy |
| Flute Type | Spiral |
| List Number | A1244 |
| Drill Bit Dimension Type | Metric |
| Decimal Equivalent | 0.1811 |
| Standards | DIN 338 |
| Depth:Dia. Ratio | 8 xD |
| Flute Length | 47 mm |
| Coolant Fed | Non-Coolant Through |
| Drilling Depth | 39 mm |
| Shank Length | 33 mm |
| Drill Length Class | Jobber-Length |
| Secondary Material Application | Aluminum, Brass, Bronze, Copper, Steel |
| Sheeter Drill | No |
| Material Grade - Machining | General Purpose |
| Measurement System | Metric |
| Drill Bit Point Type | Conical Point |
| Drill Point Length | 1.07 mm |
| Series | VA |
| Drill Diameter Tolerance | H8 |
| Primary Material Application ISO Code | M, S |
| Primary Material Application | Titanium, Nickel, Stainless Steel |
| Secondary Material Application ISO Code | N, P |
| Maximum Drilling Depth | 47 mm |
| Wire Rope Length | 80 mm |
| Length | 80 mm |
| Country of Origin (subject to change) | France |
| Package Quantity | 1 |