| Item | Linear Actuator |
|---|---|
| Rated Load | 1,200 lb |
| Stroke Length | 18 in |
| Speed @ Rated Load | 54 in/min |
| Duty Cycle | 50 % |
| Voltage | 12 V DC |
| Full Load Amps | 25 |
| Retracted Length | 25.89 in |
| Drive System Type | Ball Screw |
| Mounting Type | Clevis |
| Bearing Type | Double Ball |
| Dimension G | 6.1 in |
| Gear Case Type | Parallel Spur |
| Feedback Signal | No |
| Gear Material | Aluminum |
| Seal Guide Material | Plastic |
| Clutch Included | Yes |
| Finish | Powder Coated |
| Dimension B | 1.13 in |
| Max. Ambient Temp. | 60 Degrees C (140 Degrees F) |
| Screw Type | Ball |
| Capacitor Included | No |
| Enclosure Type | Totally Enclosed Non Ventilated |
| Housing Material | Aluminum |
| Standards | CE Listed |
| Thermal Protection | Automatic |
| Motor Type | Permanent Magnet |
| Dimension D | 0.5 in |
| Capacitor Required | No |
| Nut Material | Bronze |
| Series | K2X |
| Gear Ratio | 10:1 |
| Speed at No Load | 1.72 in/sec |
| System of Measurement | Inch, Metric |
| Motor Enclosure Design | Totally Enclosed Non-Ventilated |
| Includes Capacitor | Capacitor Not Included |
| Operating Temperature - Minimum | -20 deg F |
| Housing Finish | Powder Coated |
| Load Capacity | 3,000 lbf |
| Full Load Current | 25 A |
| Speed at Full Load | 0.9 in/sec |
| Includes Thermal Protection | Thermal Protection Included |
| Operating Temperature - Maximum | 150 deg F |
| Includes Clutch | Clutch Included |
| Overall Width | 3.08 in |
| Overall Height | 5.86 in |
| Static Load Capacity | 3,000 lbf |
| Dynamic Load Capacity | 1,200 lbf |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |