Corner Radius End Mill, 0.1875 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Inch, 0.015 in, 0.625 in, 2 1/4 in
| Corner Radius | 0.015 in |
|---|---|
| Number of Flutes | 4 |
| Single End/Double End | Single |
| End Mill Cutting Type | Center Cutting |
| Shank Dia. | 3/16 in |
| Max. Helix Angle | 39 deg |
| Series | Varimill(TM) Xtreme(TM) |
| Finish - Machining | AlTiN |
| Material - Machining | Carbide |
| Min. Helix Angle | 37 deg |
| Material Applications | Cast Iron, Stainless Steel, Steel, Hardened Materials, High-Temp Alloys |
| Length of Cut | 5/8 in |
| Overall Length | 2-1/4 in |
| Neck Length | Not Applicable |
| Number of Coolant Holes | 0 |
| Measurement System | Inch |
| Pitch | Not Applicable |
| Cutting Direction | Right Hand |
| Chamfer Width | Not Applicable |
| Item | Corner Radius End Mill |
| Material Grade - Machining | WS15PE |
| Flute Type | Spiral |
| List Number | 4X0E |
| Primary Material Application ISO Code | P, K, M |
| Chamfer Angle | Not Applicable |
| Milling Dia. | 3/16 in |
| Shank Type - Machining | Straight |
| Drilling Tool Configuration | Individual |
| Helix Angle | 30 Degrees |
| Coolant Fed | Non-Coolant Through |
| End Mill Application | Drilling, Helical Milling, Plunge Milling, Ramping :, Side Milling/Shoulder Milling: Square End, Slotting: Square End, Trochoidal Milling |
| Neck Dia. | Not Applicable |
| End Mill Style | Corner-Radius |
| Primary Material Application | Cast Iron, Stainless Steel, Steel |
| Flute Spacing | Variable |
| Secondary Material Application ISO Code | H, S |
| Secondary Material Application | Nickel, Titanium, Hardened Steel |
| Wire Rope Length | 2-1/4 in |
| Length | 2-1/4 in |
| Country of Origin (subject to change) | Israel |
| Package Quantity | 1 |