Diamond Turning Insert, Inscribed Circle 3/8 in, Bright (Uncoated), ANSI Code CCMW321, Clearance Angle 7 Degrees
| Item | Diamond Turning Insert |
|---|---|
| Insert Shape | Diamond |
| Insert Style | CCMW |
| Inscribed Circle | 3/8 in |
| Insert Size | 321 |
| Chip-Breaker | No |
| Grade | THM |
| Corner Radius | 1/64 in |
| Insert Material | Carbide |
| Insert Application | Finishing |
| Rake | Positive |
| ISO Number | CCMW090304 |
| Workpiece Compatibility | Cast Iron (K), Hardened (H), Nonferrous (N), Super Alloy (S) |
| Hardened (H) Compatibility | Yes |
| Cutting Direction | Neutral |
| Insert Thickness | 1/8 in |
| Mounting Style | Screw |
| Super Alloy (S) Compatibility | Yes |
| Mounting Hole Dia. | 0.173 in |
| ANSI Number | CCMW321 |
| Stainless (M) Compatibility | No |
| Cast Iron (K) Compatibility | Yes |
| Nose Radius | 0.016 in |
| Coating | Uncoated |
| Steel (P) Compatibility | No |
| Non Ferrous (N) Compatibility | Yes |
| For Use With | Toolholders, Boring Bars |
| No. of Edges | 2 |
| Relief Angle | 7 Degrees |
| Thickness | 1/8 in |
| Finish - Machining | Bright |
| Cutting Application | Turning |
| Material - Machining | Carbide |
| Clearance Angle | 7 deg |
| Measurement System | Fractional Inch |
| Cutting Edge Length | 9.67 mm |
| Primary Material Application | Titanium, Brass, Bronze, Copper, Magnesium, Nickel, Cast Iron, Aluminum, Hardened Steel |
| Insert Holding Type | 40 Degrees to 60 Degrees Countersink Hole |
| Shape | Rhombic |
| Included Angle | 80 Degrees |
| ANSI Code | CCMW321 |
| Manufacturer Grade | THM |
| Number of Cutting Edges | 2 |
| Primary Material Application ISO Code | S, K, N, H |
| Material | Carbide |
| Style | CCMW |
| Coolant Fed | Non-Coolant Through |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |