Diamond Turning Insert, Chip-Breaker Code 1P, Inscribed Circle 3/8 in, AlTiN, ANSI Code VBGT33051P, Chip-Breaker Style On One Side, Clearance Angle 5 Degrees
| Item | Diamond Turning Insert |
|---|---|
| Insert Shape | Diamond |
| Insert Style | VBGT |
| Inscribed Circle | 3/8 in |
| Insert Size | 3,305 |
| Chip-Breaker | Yes |
| Grade | TN10U |
| Corner Radius | 0.008 in |
| Insert Material | Carbide |
| Insert Application | Finishing |
| Rake | Positive |
| ISO Number | VBGT1604021P |
| ANSI Number | VBGT33051P |
| Relief Angle | 5 Degrees |
| Hardened (H) Compatibility | No |
| Insert Thickness | 3/16 in |
| Cast Iron (K) Compatibility | Yes |
| Non Ferrous (N) Compatibility | Yes |
| Mounting Style | Screw |
| Stainless (M) Compatibility | Yes |
| Super Alloy (S) Compatibility | Yes |
| No. of Edges | 2 |
| Nose Radius | 0.008 in |
| Steel (P) Compatibility | Yes |
| For Use With | Toolholders, Boring Bars |
| Coating | ALTIN |
| Workpiece Compatibility | Cast Iron (K), Nonferrous (N), Stainless (M), Steel (P), Super Alloy (S) |
| Cutting Direction | Neutral |
| Mounting Hole Dia. | 0.173 in |
| Cutting Edge Length | 16 mm |
| Shape | Rhombic |
| Primary Material Application | Titanium, Nickel, Stainless Steel |
| ANSI Code | VBGT33051P |
| Chip-Breaker Style | On One Side |
| Secondary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Steel |
| Finish - Machining | AlTiN |
| Thickness | 3/16 in |
| Measurement System | Fractional Inch |
| Cutting Application | Turning |
| Primary Material Application ISO Code | M, S |
| Included Angle | 35 Degrees |
| Number of Cutting Edges | 2 |
| Chip-Breaker Code | 1P |
| Clearance Angle | 5 deg |
| Insert Holding Type | 40 Degrees to 60 Degrees Countersink Hole |
| Secondary Material Application ISO Code | K, P, N |
| Manufacturer Grade | TN10U |
| Material - Machining | Carbide |
| Material | Carbide |
| Style | VBGT |
| Coolant Fed | Non-Coolant Through |
| Country of Origin (subject to change) | Bangladesh |
| Package Quantity | 1 |