Square End Mill, 0.1875 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 0.625 in, Overall Length 2 in, Shank Dia. 1/8 in, Neck Dia. Not Applicable
| Dimension Type | Decimal inch |
|---|---|
| Milling Diameter | 3/16 in |
| End Mill Material | Carbide |
| Number of Flutes | 5 |
| Length of Cut | 5/8 in |
| Single End/Double End | Single |
| End Mill Cutting Type | Center Cutting |
| Grade | WP15PE |
| Shank Dia. | 1/8 in |
| Overall Length | 2 in |
| Cutting Direction | Right Hand |
| Cast Iron (K) Compatibility | Yes |
| Non Ferrous (N) Compatibility | No |
| End Mill Application | Finishing |
| Shank Type | Straight |
| Hardened (H) Compatibility | Yes |
| Neck Length | Not Applicable |
| Milling Dia. | 3/16 in |
| Steel (P) Compatibility | Yes |
| Super Alloy (S) Compatibility | Yes |
| Item | Square End Mill |
| List Number | 4C05 |
| Helix Angle | 45 deg |
| Stainless (M) Compatibility | Yes |
| End Mill Style | Square |
| Finish | AlTiN |
| Neck Dia. | Not Applicable |
| Pitch | Not Applicable |
| Material - Machining | Carbide |
| Measurement System | Inch |
| Finish - Machining | AlTiN |
| Material Grade - Machining | WP15PE |
| Drilling Tool Configuration | Individual |
| Shank Type - Machining | Straight |
| Coolant Fed | Non-Coolant Through |
| Primary Material Application | Hardened Steel, Stainless Steel, Steel |
| Primary Material Application ISO Code | P, H, M |
| Series | Finishers |
| Secondary Material Application ISO Code | K |
| Secondary Material Application | Cast Iron |
| Flute Spacing | Fixed |
| Flute Type | Spiral |
| Max. Helix Angle | 45 deg |
| Wire Rope Length | 2 in |
| Length | 2 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |