Square End Mill, 0.625 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Length of Cut 1.25 in, Overall Length 3 1/2 in, Shank Dia. 5/8 in, Neck Dia. Not Applicable
| Dimension Type | Decimal inch |
|---|---|
| Milling Diameter | 5/8 in |
| End Mill Material | Carbide |
| Number of Flutes | 5 |
| Length of Cut | 1-1/4 in |
| Single End/Double End | Single |
| End Mill Cutting Type | Center Cutting |
| Grade | WP15PE |
| Shank Dia. | 5/8 in |
| Overall Length | 3-1/2 in |
| Super Alloy (S) Compatibility | Yes |
| Hardened (H) Compatibility | Yes |
| End Mill Application | Finishing, Roughing |
| Stainless (M) Compatibility | Yes |
| Cutting Direction | Right Hand |
| List Number | 5V0C |
| Milling Dia. | 5/8 in |
| Finish | AlTiN |
| Cast Iron (K) Compatibility | Yes |
| Steel (P) Compatibility | Yes |
| Non Ferrous (N) Compatibility | No |
| Item | Square End Mill |
| Shank Type | Weldon |
| Helix Angle | 38 deg |
| End Mill Style | Square |
| Neck Length | Not Applicable |
| Neck Dia. | Not Applicable |
| Pitch | Not Applicable |
| Finish - Machining | AlTiN |
| Measurement System | Inch |
| Material - Machining | Carbide |
| Material Grade - Machining | WP15PE |
| Drilling Tool Configuration | Individual |
| Shank Type - Machining | Weldon Flat |
| Coolant Fed | Non-Coolant Through |
| Primary Material Application ISO Code | P, K, M |
| Primary Material Application | Cast Iron, Stainless Steel, Steel |
| Series | VariMill II(TM) |
| Max. Helix Angle | 38 deg |
| Secondary Material Application ISO Code | K, M |
| Standards | ANSI |
| Flute Spacing | Variable |
| For Material Hardness | 52 HRC |
| Secondary Material Application | Cast Iron, Stainless Steel |
| Flute Type | Spiral |
| Wire Rope Length | 3-1/2 in |
| Length | 3-1/2 in |
| Country of Origin (subject to change) | Israel |
| Package Quantity | 1 |