Milling Insert, Inscribed Circle 0.394 in, Rake Positive
| Chip-Breaker | Yes |
|---|---|
| Cast Iron (K) Compatibility | No |
| Insert Thickness | 0.271 in |
| Nose Radius | 0.079 in |
| Insert Application | Medium |
| Coating | Al2O3 |
| Workpiece Compatibility | Stainless (M), Steel (P), Super Alloy (S) |
| ANSI Number | XNPU1505SRMM |
| Item | Milling Insert |
| Lead Angle | 90 deg |
| Hardened (H) Compatibility | No |
| Inscribed Circle | 0.394 in |
| Mounting Hole Dia. | 4.65 mm |
| Cutting Direction | Right Hand |
| Insert Material | Carbide |
| Mounting Style | Screw Clamp |
| Super Alloy (S) Compatibility | Yes |
| Insert Size | 15T620 |
| Non Ferrous (N) Compatibility | No |
| Rake | Positive |
| No. of Edges | 4 |
| Grade | WK15CM |
| Insert Style | XNPU |
| Insert Shape | Rectangle |
| Stainless (M) Compatibility | Yes |
| For Use With | VSM490-15 Series 0 Degrees /90 Degrees Shoulder Mills |
| ISO Number | XNPU15T620SRMM |
| Steel (P) Compatibility | Yes |
| Series | VSM490-15 |
| Through Hole Inside Dia. | 4.65 mm |
| Included Angle | 90 deg |
| Cutting Edge Length | 15.3 mm |
| Cutting Application | Milling |
| Manufacturer Grade | WK15CM |
| Number of Cutting Edges | 4 |
| For Toolholder | VSM490D100Z02C100XN15L800, VSM490D100Z02W075XN15, VSM490D100Z02W100XN15, VSM490D125Z03C125XN15L800, VSM490D125Z03W100XN15, VSM490D150Z03W125XN15, VSM490D150Z04C125XN15L800, VSM490D150Z04W125XN15, VSM490D150Z05S050XN15, VSM490D200Z05S075XN15, VSM490D200Z06S075XN15, VSM490D250Z05S075XN15, VSM490D250Z06S075XN15, VSM490D250Z07S100XN15, VSM490D300Z07S100XN15, VSM490D300Z09S100XN15, VSM490D400Z08S150XN15, VSM490D400Z11S150XN15, VSM490D500Z09S150XN15, VSM490D500Z12S150XN15, VSM490D600Z10S200XN15 |
| Width | 10 mm |
| Shape | Rectangle |
| Primary Material Application | Cast Iron |
| Measurement System | Fractional Inch |
| ANSI Code | XNPU1505SRMM |
| Finish - Machining | AlOX-SN |
| Clearance Angle | 0 deg |
| Material - Machining | Carbide |
| Chip-Breaker Code | MM |
| Hole Type | 40 Degrees to 60 Degrees Double Countersink Hole |
| Thickness | 0.271 in |
| Corner Radius | 5/64 in |
| Primary Material Application ISO Code | K |
| Insert Holding Type | Clamp |
| Coating Process | CVD |
| Chip-Breaker Style | Double Sided |
| Compatible Product Type | 0 Degrees /90 Degrees Shoulder Mills, VSM490-15 Series Shoulder Mills |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |