Pipe and Conduit Thread Tap, Thread Size 1/2 In.-14, NPTF, Overall Length 3 1/8 in, High Speed Steel, TiN, Right Hand, Thread Length 1 21/32 in, 75 Percent Thread Drill Size 45/64 in, Thread Limit H6, Class of Fit Not Applicable, Number of Flutes 4
| Item | Pipe Tap |
|---|---|
| Tap Thread Size | 1/2"-14 |
| Tap Chamfer | Taper |
| Number of Flutes | 4 |
| Tap Thread Type | NPT |
| Tap Grouping | Tap |
| List Number | 2,320 |
| Overall Length | 3-1/8 in |
| Tap Dimension Type | Pipe |
| Number of Pieces | 1 |
| Thread Direction | Right Hand |
| Shank Dia. | 0.688 in |
| Pitch Diameter Limit | Not Rated |
| Tap Finish | TiN |
| Tap Size | 1/2" |
| Tap Style | Pipe |
| Standards | ANSI, USCTI |
| Tap Material | High Speed Steel |
| Thread Length | 1-21/32 in |
| Cutting Direction - Machining | Right Hand |
| Size | 1/2" |
| Series | 2320/5320 |
| Extended Neck | No |
| Max. Projection | 0.579 in |
| Tap Shank Standard | USCTI |
| Material Grade - Machining | 2320 |
| Shank Length | 1-15/32 in |
| Coolant Fed | Non-Coolant Through |
| Square Size | 0.275 in |
| Secondary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Stainless Steel |
| Drill Bit Size | 45/64 in |
| Secondary Material Application ISO Code | K, N, M |
| Primary Material Application | Steel |
| Thread Size | 1/2"-14 |
| Interrupted Thread | No |
| Tap Length Standard | USCTI |
| Measurement System | Fractional Inch |
| Threads per Inch | 14 |
| Thread Standard | NPTF |
| Helix Angle | 0 deg |
| Thread Limit | H6 |
| 75% Thread Drill Size | 45/64 in |
| Primary Material Application ISO Code | P |
| Maximum Projection | 37/64 in |
| Square Length | 0.28 in |
| Flute Type | Straight |
| Square Width | 0.28 in |
| Class of Fit | Not Applicable |
| Shank Diameter | 11/16 in |
| Shank Type | Square |
| Hook | Not Applicable |
| Impact Rated | Not Applicable |
| Wire Rope Length | 3-1/8 in |
| Length | 3-1/8 in |
| Country of Origin (subject to change) | Estonia |
| Package Quantity | 1 |