Spiral Flute Tap, Thread Size #6-32, UNC, Overall Length 1 63/64 in, Powdered Metal, Not Applicable, Thread Length 23/64 in, 75 Percent Thread Drill Size #36, Thread Limit H3, Class of Fit 3B, Thread Direction Right Hand, Number of Flutes 3
| Item | Spiral Flute Tap |
|---|---|
| Overall Length | 12 in |
| Tap Style | Spiral Flute |
| Shank Dia. | 0.141 in |
| Tap Chamfer | Bottoming |
| Tap Dimension Type | Inch |
| Tap Material | High Speed Steel |
| Tap Size | #6 |
| Number of Flutes | 3 |
| Thread Length | 23/64 in |
| Standards | ANSI |
| Tap Finish | Oxide, Nitride |
| Tap Thread Size | #6-32 |
| Tap Grouping | Tap |
| Thread Direction | Right Hand |
| Tap Thread Type | UNC |
| Cutting Direction - Machining | Right Hand |
| Secondary Material Application | Not Applicable |
| Coolant Fed | Non-Coolant Through |
| Square Size | 0.108 in |
| Thread Standard | UNC |
| Material Grade - Machining | WS39MG |
| Secondary Material Application ISO Code | Not Applicable |
| Extended Neck | No |
| Shank Length | 1-1/8 in |
| Tap Shank Standard | ANSI |
| 55% Thread Drill Size | #32 |
| Spiral Direction | Right Hand |
| Features | Form E Bottoming Chamfer |
| Powdered Metal Base Material | Cobalt |
| Measurement System | Pipe |
| Threads per Inch | 32 |
| Primary Material Application | Nickel |
| Shank Type - Machining | Straight |
| Thread Limit | H3 |
| 65% Thread Drill Size | #34 |
| Series | GT94 |
| Primary Material Application ISO Code | S |
| Helix Angle | 11 deg |
| 75% Thread Drill Size | #36 |
| Thread Size | #6-32 |
| Class of Fit | 3 B |
| Pitch Diameter Limit | H3 |
| List Number | GT94 |
| Number of Pieces | 1 |
| Square Width | 0.108 in |
| Shank Diameter | 9/64 in |
| Tap Application | Blind Hole |
| Impact Rated | Not Applicable |
| Shank Type | Straight |
| Square Length | 0.108 in |
| Wire Rope Length | 1-63/64 in |
| Length | 1-63/64 in |
| Fits Chest Size | Form E Bottoming Chamfer |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |