Spiral Flute Tap, Thread Size M5x0.8, Metric, Overall Length 70 mm, High Speed Steel, TiN, Thread Length 8 mm, 75 Percent Thread Drill Size 4.20 mm, Thread Limit 6H, Class of Fit 6H, Thread Direction Right Hand, Number of Flutes 3
| Item | Spiral Flute Tap |
|---|---|
| Overall Length | 2-3/4 in |
| Tap Style | Spiral Flute |
| Shank Dia. | 1/8 in |
| Tap Chamfer | Plug |
| Tap Dimension Type | Inch |
| Tap Material | High Speed Steel |
| Tap Size | M5 |
| Number of Flutes | 3 |
| Thread Length | 1/2 in |
| Tap Finish | TiN |
| Number of Pieces | 1 |
| Thread Direction | Right Hand |
| Tap Thread Type | Metric |
| Standards | DIN 376 |
| Pitch Diameter Limit | 6H |
| List Number | VT-SFT |
| Tap Thread Size | M5-0.80 |
| Cutting Direction - Machining | Right Hand |
| Thread Pitch | 0.8 mm |
| Thread Standard | Metric |
| Square Size | 2.7 mm |
| Helix Angle | 45 deg |
| Spiral Direction | Right Hand |
| Shank Type - Machining | Straight |
| Coolant Fed | Non-Coolant Through |
| Shank Length | 43 mm |
| Primary Material Application | Steel |
| Thread Size | M5x0.8 |
| 65% Thread Drill Size | 4.3 mm |
| 75% Thread Drill Size | 4.20 mm |
| Thread Limit | 6H |
| Primary Material Application ISO Code | P |
| Extended Neck | Yes |
| Measurement System | Metric |
| Features | Form C Semi-Bottoming Chamfer, Tension/Compression Holders |
| Secondary Material Application ISO Code | M, K, N |
| 55% Thread Drill Size | 4.4 mm |
| Secondary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Stainless Steel |
| Series | VT-SFT |
| Material Grade - Machining | WU41EG |
| Tap Shank Standard | DIN 376 |
| Class of Fit | 6H |
| Square Length | 2.7 mm |
| Shank Diameter | 3.5 mm |
| Shank Type | Straight |
| Square Width | 2.7 mm |
| Wire Rope Length | 70 mm |
| Length | 70 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |