Spiral Flute Tap, Thread Size M6x0.75, Metric, Overall Length 80 mm, High Speed Steel, TiN, Thread Length 10 mm, 75 Percent Thread Drill Size 5.25 mm, Thread Limit 6H, Class of Fit 6H, Thread Direction Right Hand, Number of Flutes 3
| Item | Spiral Flute Tap |
|---|---|
| Overall Length | 3-1/8 in |
| Tap Style | Spiral Flute |
| Shank Dia. | 3/16 in |
| Tap Chamfer | Plug |
| Tap Dimension Type | Inch |
| Tap Material | High Speed Steel |
| Tap Size | M6 |
| Number of Flutes | 3 |
| Thread Length | 3/8 in |
| Thread Direction | Right Hand |
| List Number | VT-SFT |
| Tap Finish | TiN |
| Standards | DIN 374 |
| Tap Thread Type | Metric Fine |
| Pitch Diameter Limit | 6H |
| Number of Pieces | 1 |
| Tap Thread Size | M6-0.75 |
| Cutting Direction - Machining | Right Hand |
| Series | VT-SFT |
| Helix Angle | 45 deg |
| Secondary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Stainless Steel |
| Spiral Direction | Right Hand |
| Thread Size | M6x0.75 |
| 55% Thread Drill Size | 5.45 mm |
| Measurement System | Metric |
| Tap Shank Standard | DIN 374 |
| 65% Thread Drill Size | 5.35 mm |
| Thread Standard | Metric |
| Thread Limit | 6H |
| Extended Neck | Yes |
| Features | Form C Semi-Bottoming Chamfer, Tension/Compression Holders |
| Material Grade - Machining | WU41EG |
| Secondary Material Application ISO Code | M, K, N |
| Thread Pitch | 0.75 mm |
| Square Size | 3.4 mm |
| Primary Material Application | Steel |
| Shank Type - Machining | Straight |
| 75% Thread Drill Size | 5.25 mm |
| Primary Material Application ISO Code | P |
| Coolant Fed | Non-Coolant Through |
| Shank Length | 46 mm |
| Class of Fit | 6H |
| Shank Diameter | 4.5 mm |
| Square Length | 3.4 mm |
| Shank Type | Straight |
| Square Width | 3.4 mm |
| Wire Rope Length | 80 mm |
| Length | 80 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |