Spiral Flute Tap, Thread Size #8-32, UNC, Overall Length 2 1/8 in, Powdered Metal, TiCN, Thread Length 5/16 in, 75 Percent Thread Drill Size 3.40 mm, Thread Limit H5, Class of Fit 2B, Thread Direction Right Hand, Number of Flutes 3
| Item | Spiral Flute Tap |
|---|---|
| Overall Length | 2-1/8 in |
| Tap Style | Spiral Flute |
| Shank Dia. | 0.168 in |
| Tap Chamfer | Plug |
| Tap Dimension Type | Inch |
| Tap Material | High Speed Steel |
| Tap Size | #8 |
| Number of Flutes | 3 |
| Thread Length | 19/64 in |
| Tap Finish | TiCN |
| Thread Direction | Right Hand |
| Tap Thread Type | Metric Coarse |
| Tap Grouping | Tap |
| Tap Thread Size | #8-32 |
| Standards | ANSI |
| Cutting Direction - Machining | Right Hand |
| Primary Material Application ISO Code | S |
| Primary Material Application | Titanium, Nickel |
| Tap Shank Standard | ANSI |
| Spiral Direction | Left Hand |
| Coolant Fed | Non-Coolant Through |
| Square Size | 0.129 in |
| Thread Size | #8-32 |
| Series | GT90 |
| Shank Length | 1-3/16 in |
| Measurement System | Pipe |
| Features | WS39MG oxide/nitride for nickel- and cobalt-based alloys, WU32MG TiCN for nickel- and cobalt-based alloys |
| Threads per Inch | 32 |
| 75% Thread Drill Size | 3.40 mm |
| Extended Neck | Yes |
| Helix Angle | 15 deg |
| Thread Standard | UNC |
| 65% Thread Drill Size | 3.5 mm |
| Shank Type - Machining | Straight |
| Thread Limit | H5 |
| 55% Thread Drill Size | 3.6 mm |
| Material Grade - Machining | WU32MG |
| Powdered Metal Base Material | Cobalt |
| Class of Fit | 2 B |
| List Number | GT90 |
| Number of Pieces | 1 |
| Pitch Diameter Limit | H5 |
| Square Width | 0.129 in |
| Secondary Material Application ISO Code | Not Applicable |
| Impact Rated | Not Applicable |
| Shank Diameter | 11/64 in |
| Square Length | 0.129 in |
| Tap Application | Through Hole |
| Shank Type | Square |
| Secondary Material Application | Not Applicable |
| Wire Rope Length | 2-1/8 in |
| Length | 2-1/8 in |
| Fits Chest Size | WS39MG oxide/nitride for nickel- and cobalt-based alloys, WU32MG TiCN for nickel- and cobalt-based alloys |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |