Spiral Flute Tap, Thread Size 5/16 In.-18, UNC, Overall Length 3 35/64 in, Cobalt High Speed Steel, TiN, Thread Length 19/32 in, 75 Percent Thread Drill Size F, Thread Limit 2B, Class of Fit 2B, Thread Direction Right Hand, Number of Flutes 3
| Item | Spiral Flute Tap |
|---|---|
| Overall Length | 90.1 mm |
| Tap Style | Spiral Flute |
| Shank Dia. | 8 mm |
| Tap Chamfer | Semi-Bottoming |
| Tap Dimension Type | Inch |
| Tap Material | High Speed Steel |
| Tap Size | 5/16" |
| Number of Flutes | 3 |
| Thread Length | 15.1 mm |
| Tap Grouping | Tap |
| Thread Direction | Right Hand |
| Tap Thread Size | 5/16"-18 |
| Standards | DIN 371 |
| Tap Thread Type | Metric Fine |
| Tap Finish | TiN |
| Cutting Direction - Machining | Right Hand |
| Tap Shank Standard | DIN 371 |
| Shank Length | 1-27/32 in |
| Series | VT-SFT |
| 75% Thread Drill Size | F |
| Square Size | 0.244 in |
| Thread Standard | UNC |
| Threads per Inch | 18 |
| Measurement System | Fractional Inch |
| Coolant Fed | Non-Coolant Through |
| Thread Limit | 2B |
| Primary Material Application ISO Code | P |
| Secondary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Stainless Steel |
| Shank Type - Machining | Straight |
| Extended Neck | Yes |
| 65% Thread Drill Size | 17/64 in |
| Primary Material Application | Steel |
| Secondary Material Application ISO Code | M, K, N |
| Thread Size | 5/16"-18 |
| Helix Angle | 45 deg |
| Spiral Direction | Right Hand |
| Class of Fit | 2 B |
| 55% Thread Drill Size | I |
| Number of Pieces | 1 |
| Pitch Diameter Limit | 2B |
| List Number | VT-SFT |
| Shank Diameter | 5/16 in |
| Square Length | 0.244 in |
| Impact Rated | Not Applicable |
| Shank Type | Straight |
| Tap Application | Blind Hole |
| Square Width | 0.244 in |
| Wire Rope Length | 3-35/64 in |
| Length | 3-35/64 in |
| Country of Origin (subject to change) | Israel |
| Package Quantity | 1 |