Spiral Point Tap, Thread Size 1/4 In.-28, UNF, Overall Length 2 1/2 in, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 1 in, 75 Percent Thread Drill Size 5.45 mm, Thread Limit H3, Class of Fit 6H, Number of Flutes 2
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.255 in |
| Tap Material | High Speed Steel |
| Tap Dimension Type | Inch |
| Tap Chamfer | Bottoming |
| Tap Size | 1/4" |
| Tap Style | Spiral Point |
| Overall Length | 2-1/2 in |
| Number of Flutes | 2 |
| Tap Grouping | Tap |
| Tap Thread Type | UNC |
| Number of Pieces | 1 |
| List Number | 5302 |
| Tap Finish | Bright |
| Pitch Diameter Limit | H3 |
| Thread Length | 1 in |
| Standards | ANSI |
| Tap Thread Size | 1/4"-28 |
| Thread Direction | Right Hand |
| Cutting Direction - Machining | Right Hand |
| Series | 5302 |
| Threads per Inch | 28 |
| Primary Material Application | Steel |
| Secondary Material Application ISO Code | M, N, K |
| 75% Thread Drill Size | 5.45 mm |
| Thread Limit | H3 |
| Thread Standard | UNF |
| Extended Neck | Yes |
| Secondary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Stainless Steel |
| Primary Material Application ISO Code | P |
| Shank Type - Machining | Straight |
| Class of Fit | 6H |
| 55% Thread Drill Size | 5.7 mm |
| Coolant Fed | Non-Coolant Through |
| Square Size | 0.191 in |
| Spiral Direction | Neutral |
| Shank Length | 1-1/2 in |
| Thread Size | 1/4"-28 |
| Measurement System | Fractional Inch |
| 65% Thread Drill Size | 7/32 in |
| Helix Angle | 0 deg |
| Impact Rated | Not Applicable |
| Shank Type | Square |
| Square Length | 0.191 in |
| Square Width | 0.191 in |
| Shank Diameter | 1/4 in |
| Tap Application | Through Hole |
| Wire Rope Length | 2-1/2 in |
| Length | 2-1/2 in |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |