Spiral Point Tap, Thread Size 3/4 In.-16, UNF, Overall Length 4 1/4 in, HSS-E, Black Oxide, Right Hand, Thread Length 1 3/16 in, 75 Percent Thread Drill Size 17.50 mm, Thread Limit H3, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 0.59 in |
| Tap Material | Vanadium High Speed Steel |
| Tap Style | Spiral Point |
| Tap Size | 3/4" |
| Tap Chamfer | Plug |
| Tap Dimension Type | Inch |
| Overall Length | 4-1/4 in |
| Number of Flutes | 3 |
| Tap Finish | Oxide |
| Tap Grouping | Tap |
| Tap Thread Type | UNF |
| Thread Length | 1-13/64 in |
| Standards | ANSI |
| Thread Direction | Right Hand |
| Tap Thread Size | 3/4"-16 |
| Cutting Direction - Machining | Right Hand |
| 75% Thread Drill Size | 17.5 mm |
| Primary Material Application ISO Code | P, M, K |
| Thread Size | 3/4"-16 |
| Shank Length | 2-5/32 in |
| Thread Limit | H3 |
| Material Grade - Machining | WP49EG |
| Thread Standard | UNF |
| Square Size | 0.439 in |
| Spiral Direction | Neutral |
| Extended Neck | Yes |
| Coolant Fed | Non-Coolant Through |
| Threads per Inch | 16 |
| 55% Thread Drill Size | 17.9 mm |
| Measurement System | Fractional Inch |
| Shank Type - Machining | Straight |
| Primary Material Application | Cast Iron, Stainless Steel, Steel |
| Series | VT-SPO |
| 65% Thread Drill Size | 17.7 mm |
| Helix Angle | 0 deg |
| Size | 3/4 |
| List Number | 8301 |
| Number of Pieces | 1 |
| Pitch Diameter Limit | H3 |
| Square Width | 0.439 in |
| Shank Type | Square |
| Shank Diameter | 19/32 in |
| Secondary Material Application | Not Applicable |
| Square Length | 0.439 in |
| Impact Rated | Not Applicable |
| Tap Application | Through Hole |
| Secondary Material Application ISO Code | Not Applicable |
| Wire Rope Length | 4-1/4 in |
| Length | 4-1/4 in |
| Country of Origin (subject to change) | Germany |
| Package Quantity | 1 |