Spiral Point Tap, Thread Size M12x1.5, Metric Fine, Overall Length 100.00 mm, HSS-E-PM, TiN, Right Hand, Thread Length 22.00 mm, 75 Percent Thread Drill Size 10.50 mm, Thread Limit 6HX, Class of Fit 6H, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 9 mm |
| Tap Material | High Speed Steel |
| Tap Style | Spiral Point |
| Tap Size | M12 |
| Tap Chamfer | Plug |
| Tap Dimension Type | Metric |
| Overall Length | 100 mm |
| Number of Flutes | 3 |
| Tap Grouping | Tap |
| Tap Thread Size | M12-1.5 |
| Thread Direction | Right Hand |
| Thread Length | 22 mm |
| Tap Finish | TiN |
| Standards | DIN 376 |
| Tap Thread Type | UNF |
| Cutting Direction - Machining | Right Hand |
| Thread Standard | Metric Fine |
| 55% Thread Drill Size | 10.9 mm |
| 65% Thread Drill Size | 27/64 in |
| Shank Type - Machining | Straight |
| Thread Limit | 6HX |
| Thread Size | M12x1.5 |
| Powdered Metal Base Material | Cobalt |
| Shank Length | 78 mm |
| Measurement System | Metric |
| Primary Material Application | Steel |
| 75% Thread Drill Size | 10.5 mm |
| Secondary Material Application ISO Code | S |
| Square Size | 7 mm |
| Spiral Direction | Neutral |
| Extended Neck | Yes |
| Thread Pitch | 1.5 mm |
| Series | GT00 |
| Coolant Fed | Non-Coolant Through |
| Secondary Material Application | Titanium, Nickel |
| Material Grade - Machining | WP31MG |
| Primary Material Application ISO Code | P |
| Class of Fit | 6H |
| Helix Angle | 0 deg |
| List Number | GT00 |
| Number of Pieces | 1 |
| Pitch Diameter Limit | 6HX |
| Shank Type | Straight |
| Shank Diameter | 9 mm |
| Square Length | 7 mm |
| Square Width | 7 mm |
| Wire Rope Length | 100 mm |
| Length | 100 mm |
| Country of Origin (subject to change) | Germany |
| Package Quantity | 1 |