Spiral Point Tap, Thread Size 9/16 In.-18, UNF, Overall Length 4 21/64 in, Cobalt High Speed Steel, Black Oxide, Right Hand, Thread Length 63/64 in, 75 Percent Thread Drill Size 12.90 mm, Thread Limit 2B, Class of Fit 2B, Number of Flutes 3
| Item | Spiral Point Tap |
|---|---|
| Shank Dia. | 11 mm |
| Tap Material | High Speed Steel |
| Tap Style | Spiral Point |
| Tap Size | 9/16" |
| Tap Chamfer | Plug |
| Tap Dimension Type | Inch |
| Overall Length | 110 mm |
| Number of Flutes | 3 |
| Tap Thread Size | 9/16"-18 |
| Tap Grouping | Tap |
| Thread Length | 25 mm |
| Tap Finish | Oxide |
| Tap Thread Type | UNF |
| Thread Direction | Right Hand |
| Standards | DIN 376 |
| Cutting Direction - Machining | Right Hand |
| Thread Limit | 2B |
| Material Grade - Machining | WP49EG |
| Measurement System | Fractional Inch |
| Spiral Direction | Neutral |
| Threads per Inch | 18 |
| 65% Thread Drill Size | 13.25 mm |
| Primary Material Application | Cast Iron, Stainless Steel, Steel |
| Coolant Fed | Non-Coolant Through |
| 55% Thread Drill Size | 13.25 mm |
| Thread Size | 9/16"-18 |
| Shank Type - Machining | Straight |
| Thread Standard | UNF |
| Series | VT-SPO |
| Square Size | 0.354 in |
| Primary Material Application ISO Code | P, M, K |
| 75% Thread Drill Size | 12.9 mm |
| Extended Neck | Yes |
| Class of Fit | 2B |
| Shank Length | 2-7/32 in |
| Helix Angle | 0 deg |
| Number of Pieces | 1 |
| List Number | VT-SPO |
| Pitch Diameter Limit | 2B |
| Shank Diameter | 7/16 in |
| Square Width | 0.354 in |
| Shank Type | Straight |
| Impact Rated | Not Applicable |
| Square Length | 0.354 in |
| Tap Application | Through Hole |
| Secondary Material Application ISO Code | Not Applicable |
| Secondary Material Application | Not Applicable |
| Wire Rope Length | 4-21/64 in |
| Length | 4-21/64 in |
| Country of Origin (subject to change) | Israel |
| Package Quantity | 1 |