Square Milling Insert, Inscribed Circle 1/2 in, Rake Positive
| Cast Iron (K) Compatibility | Yes |
|---|---|
| Super Alloy (S) Compatibility | No |
| Chip-Breaker | Yes |
| Steel (P) Compatibility | Yes |
| Mounting Style | Screw Clamp |
| Insert Style | SDMT |
| Grade | TN6525 |
| Nose Radius | 0.047 in |
| No. of Edges | 4 |
| Workpiece Compatibility | Cast Iron (K), Stainless (M), Steel (P) |
| ISO Number | SDMT1204PDRMH |
| Lead Angle | 90 deg |
| Insert Material | Carbide |
| Insert Thickness | 0.189 in |
| ANSI Number | SDMT43PDRMH |
| Rake | Positive |
| Non Ferrous (N) Compatibility | No |
| For Use With | M390 Series Helical Mills |
| Coating | ALOX-SN |
| Inscribed Circle | 1/2 in |
| Item | Square Milling Insert |
| Stainless (M) Compatibility | Yes |
| Insert Size | 43 |
| Insert Application | Roughing |
| Mounting Hole Dia. | 0.173 in |
| Hardened (H) Compatibility | No |
| Insert Shape | Square |
| Cutting Direction | Right Hand |
| Series | M690 |
| Cutting Edge Length | 12.7 mm |
| Clearance Angle | 15.3 deg |
| Material - Machining | Carbide |
| Cutting Application | Light Finishing |
| Insert Holding Type | Clamp |
| Wiper Insert | Yes |
| Number of Cutting Edges | 4 |
| Included Angle | 90 deg |
| Through Hole Inside Dia. | 0.173 in |
| Secondary Material Application ISO Code | K, M |
| Shape | Square |
| ANSI Code | SDMT43PDRMH |
| Coating Process | PVD |
| Hole Type | 40 Degrees to 60 Degrees Countersink Hole |
| Corner Radius | 3/64 in |
| Secondary Material Application | Cast Iron, Stainless Steel |
| Thickness | 0.1893 in |
| Manufacturer Grade | TN6525 |
| Primary Material Application ISO Code | P |
| Chip-Breaker Code | MH |
| Chip-Breaker Style | On One Side |
| Finish - Machining | TiAlN |
| Measurement System | Fractional Inch |
| Primary Material Application | Steel |
| Compatible Product Type | Helical Mills |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |