Square Turning Insert, Chip-Breaker Code 65, Inscribed Circle 1/2 in, TiN
| Item | Square Turning Insert |
|---|---|
| Insert Shape | Square |
| Insert Style | SNMM |
| Inscribed Circle | 1/2 in |
| Insert Size | 432 |
| Chip-Breaker | Yes |
| Grade | WP25CT |
| Corner Radius | 1/32 in |
| Insert Material | Carbide |
| Insert Application | Roughing |
| Rake | Negative |
| ISO Number | SNMM12040865 |
| Coating | TiN |
| Hardened (H) Compatibility | No |
| Insert Thickness | 3/16 in |
| Relief Angle | 0 Degrees |
| Workpiece Compatibility | Cast Iron (K), Steel (P) |
| Nose Radius | 0.031 in |
| Steel (P) Compatibility | Yes |
| Cast Iron (K) Compatibility | Yes |
| Mounting Hole Dia. | 0.203 in |
| Super Alloy (S) Compatibility | No |
| No. of Edges | 4 |
| Mounting Style | Clamp |
| Cutting Direction | Neutral |
| Non Ferrous (N) Compatibility | No |
| For Use With | Toolholders, Boring Bars |
| ANSI Number | SNMM43265 |
| Stainless (M) Compatibility | No |
| Chip-Breaker Code | 65 |
| Primary Material Application ISO Code | P |
| Finish - Machining | TiN |
| Measurement System | Fractional Inch |
| ANSI Code | SNMM43265 |
| Number of Cutting Edges | 4 |
| Insert Holding Type | Straight Hole |
| Cutting Edge Length | 12.7 mm |
| Included Angle | 90 Degrees |
| Secondary Material Application | Cast Iron |
| Thickness | 3/16 in |
| Cutting Application | Turning |
| Material - Machining | Carbide |
| Coating Process | CVD |
| Clearance Angle | 0 deg |
| Primary Material Application | Steel |
| Chip-Breaker Style | On One Side |
| Manufacturer Grade | WP25CT |
| Secondary Material Application ISO Code | K |
| Shape | Square |
| Material | Carbide |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |