Straight Flute Tap, Thread Size 1 In.-12, UNF, Taper, Overall Length 5.13 in, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 2.5 in, 75 Percent Thread Drill Size 23.30 mm, Thread Limit H4, Class of Fit 2B, 3B
| Item | Straight Flute Hand Tap |
|---|---|
| Shank Dia. | 0.8 in |
| Tap Material | High Speed Steel |
| Tap Chamfer | Taper |
| Tap Size | 1" |
| Tap Style | Straight Flute |
| Tap Dimension Type | Inch |
| Number of Flutes | 4 |
| Overall Length | 5-1/8 in |
| Thread Direction | Right Hand |
| Standards | ANSI, Unified, American National Threads |
| Thread Length | 2-1/2 in |
| Pitch Diameter Limit | H4 |
| Tap Grouping | Tap |
| Tap Finish | Bright |
| Tap Thread Size | 1"-12 |
| List Number | 5303 |
| Number of Pieces | 1 |
| Tap Thread Type | UNC |
| Cutting Direction - Machining | Right Hand |
| Series | 5303 |
| Size | 1" |
| Tap Shank Standard | ANSI |
| Threads per Inch | 12 |
| Extended Neck | Yes |
| Secondary Material Application ISO Code | K, N, M |
| 55% Thread Drill Size | 15/16 in |
| Thread Limit | H4 |
| Tap Length Standard | ANSI |
| Thread Size | 1"-12 |
| Spiral Direction | Neutral |
| Coolant Fed | Non-Coolant Through |
| Measurement System | Fractional Inch |
| Primary Material Application | Steel |
| Primary Material Application ISO Code | P |
| 75% Thread Drill Size | 23.3 mm |
| Secondary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Stainless Steel |
| Square Size | 0.6 in |
| Class of Fit | 2 B, 3 B |
| Shank Length | 2-5/8 in |
| 65% Thread Drill Size | 23.6 mm |
| Shank Type - Machining | Straight |
| Thread Standard | UNF |
| Helix Angle | 0 Degrees |
| Square Width | 0.6 in |
| Tap Application | Through Hole, Blind Hole |
| Square Length | 0.6 in |
| Shank Diameter | 0.8 in |
| Shank Type | Square |
| Impact Rated | Not Applicable |
| Wire Rope Length | 5.13 in |
| Length | 5.13 in |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |