Straight Flute Tap, Thread Size M12x1.5, Metric, Semi-Bottoming, Overall Length 100 mm, Powdered Metal, Not Applicable, Right Hand, Thread Length 15 mm, 75 Percent Thread Drill Size 10.50 mm, Thread Limit Not Applicable, Class of Fit 6HX
| Item | Straight Flute Hand Tap |
|---|---|
| Shank Dia. | 9 mm |
| Tap Material | High Speed Steel |
| Tap Chamfer | Semi-Bottoming |
| Tap Size | M12 |
| Tap Style | Straight Flute |
| Tap Dimension Type | Metric |
| Number of Flutes | 4 |
| Overall Length | 100 mm |
| Thread Direction | Right Hand |
| Number of Pieces | 1 |
| Tap Grouping | Tap |
| Tap Thread Size | M12-1.50 |
| Standards | DIN 374 |
| List Number | GT40 |
| Thread Length | 15 mm |
| Tap Thread Type | Metric Fine |
| Pitch Diameter Limit | 6 HX |
| Tap Finish | TiCN |
| Cutting Direction - Machining | Right Hand |
| Series | GT40 |
| Shank Length | 61 mm |
| Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper |
| Thread Limit | Not Applicable |
| Thread Pitch | 1.5 mm |
| Thread Size | M12x1.5 |
| Material Grade - Machining | GP6520 |
| Spiral Direction | Neutral |
| 55% Thread Drill Size | 10.9 mm |
| Thread Standard | Metric |
| Tap Length Standard | DIN 374 |
| Powdered Metal Base Material | Cobalt |
| Coolant Fed | Non-Coolant Through |
| Measurement System | Metric |
| Primary Material Application ISO Code | K, N |
| Extended Neck | Yes |
| Square Size | 7 mm |
| 65% Thread Drill Size | 27/64 in |
| 75% Thread Drill Size | 10.5 mm |
| Shank Type - Machining | Straight |
| Tap Shank Standard | DIN 374 |
| Class of Fit | 6HX |
| Helix Angle | 0 Degrees |
| Square Width | 7 mm |
| Secondary Material Application | Not Applicable |
| Impact Rated | Not Applicable |
| Secondary Material Application ISO Code | Not Applicable |
| Shank Diameter | 9 mm |
| Tap Application | Blind Hole |
| Square Length | 7 mm |
| Shank Type | Straight |
| Wire Rope Length | 100 mm |
| Length | 100 mm |
| Country of Origin (subject to change) | Israel |
| Package Quantity | 1 |