Roughing End Mill, 0.75 in Milling Dia., Cobalt, TiN, Weldon Flat, Length of Cut 0.75 in, Overall Length 2 7/8 in, Shank Dia. 3/4 in, Neck Dia. Not Applicable
| Milling Diameter | 3/4 in |
|---|---|
| Number of Flutes | 3 |
| Length of Cut | 3/4 in |
| Single End/Double End | Single |
| End Mill Cutting Type | Center Cutting |
| Grade | General Purpose |
| Shank Dia. | 3/4 in |
| Overall Length | 2-7/8 in |
| Milling Dia. | 3/4 in |
| Finish | TiN |
| Pitch | Fine |
| Helix Angle | 30 deg |
| Cutting Direction | Right Hand |
| End Mill Application | Roughing |
| End Mill Style | Square |
| Series | Not Applicable |
| Neck Length | Not Applicable |
| Item | Roughing End Mill |
| List Number | E2086 |
| Neck Dia. | Not Applicable |
| Material Applications | Steel, Carbon Steel |
| Drilling Tool Configuration | Individual |
| Measurement System | Inch |
| Finish - Machining | TiN |
| Shank Type - Machining | Weldon Flat |
| Material - Machining | Cobalt |
| Material Grade - Machining | TiN |
| Primary Material Application ISO Code | P |
| Primary Material Application | Steel |
| Secondary Material Application ISO Code | N |
| Secondary Material Application | Aluminum, Brass, Copper, Bronze |
| Flute Type | Spiral |
| Flute Spacing | Fixed |
| Min. Helix Angle | Not Applicable |
| Max. Helix Angle | 30 deg |
| Wire Rope Length | 2-7/8 in |
| Length | 2-7/8 in |
| Country of Origin (subject to change) | Korea, Republic of |
| Package Quantity | 1 |