Sewage Ejector Pump, HP 3, Rated Voltage 230V AC, Hz 60 Hz, Phase - Pumps 1, Amps 17 A, Motor Type Capacitor Start/Run, Body Material Cast Iron, Impeller Material Ductile Iron, Shaft Seal Material - Pumps Tandem Carbon, Ceramic, Switch Actuation No Switch Included, Switch Electrical Connection No Switch Included, On Point Not Applicable, Off Point Not Applicable, Flow Rate @ 10 Ft. of Head 370 gpm, Flow Rate @ 15 Ft. of Head 319 gpm, Flow Rate @ 20 Ft. of Head 260 gpm
| HP | 3 |
|---|---|
| Phase - Pumps | 1 |
| Switch Actuation | No Switch Included |
| Body Material | Cast Iron |
| Flow Rate @ 10 Ft. of Head | 370 gpm |
| Max. Head | 39 ft 6 in |
| Impeller Material | Ductile Iron |
| Max. Diameter Solids | 2-1/2 in |
| Cord Length | 25 ft |
| Hz | 60 Hz |
| Duty Cycle | Continuous |
| Off Point | Not Applicable |
| Agency Compliance | C22.2 No. 108, CSA Certified, SSPMA, UL 778, UL Listed |
| Manufacturers Warranty Length | 3 yr |
| Flow Rate @ 40 Ft. of Head | 0 gpm |
| Motor Type | Capacitor Start/Run |
| Switch Electrical Connection | No Switch Included |
| On Point | Not Applicable |
| Thermal Protection | Yes |
| Amps | 17 |
| Flow Rate @ 15 Ft. of Head | 319 gpm |
| Flow Rate @ 60 Ft. of Head | 0 gpm |
| Rated Voltage | 230V AC |
| Discharge Standard | Flanged |
| Overall Height | 29-1/4 in |
| Discharge Dia. | 4 in |
| Shaft Seal Material - Pumps | Tandem Carbon, Ceramic |
| Max. Liquid Temp. | 104 deg F |
| Discharge | 4 in (Flanged) |
| Item | Sewage Ejector Pump |
| Flow Rate @ 20 Ft. of Head | 260 gpm |
| Phase | Single |
| Min. Sump Pit Dia. | 30 in |
| Width at Widest Point | 17-3/8 in |
| RPM | 1,750 |
| Alert Messaging | Not Applicable |
| Liquid Temperature - Maximum | 104 deg F |
| Motor Housing Material | Cast Iron |
| Solids Diameter - Maximum | 2-1/2 in |
| Control Panel Functions | Not Applicable |
| Alerts Indicated | Not Applicable |
| Shaft Seal Type | Double Mechanical |
| Discharge Gender | Female |
| Sump Pit Diameter - Minimum | 30 in |
| Shaft Seal Material | Ceramic, Carbon |
| Rotation Speed - Maximum | 1,750 rpm |
| Series | Model 641 |
| Volute Material | Cast Iron |
| Frequency | 60 Hz |
| Standards | C22.2 No. 108, CSA Certified, SSPMA, UL 778, UL Listed |
| Alert Output | Not Applicable |
| For Media Type | Sewage Water |
| Flow Rate @ 10 ft of Head | 370 gpm |
| Current | 17 A |
| Discharge Diameter | 4 in |
| Connectivity | Not Applicable |
| Requires Control Panel | Control Panel Required |
| Discharge Orientation | Horizontal |
| Body Diameter | 17-3/8 in |
| Feet of Head - Maximum | 39 ft 6 in |
| Power Source | Corded Electric |
| Hazardous Location Class | Not Rated |
| Horsepower | 3 |
| Power Source - TS Only | Corded Electric |
| Power Source - old | Corded Electric |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |