Machine Screws, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Phillips, Thread Size #10-32, Fastener Length 2 1/2 in, Head Width 0.333 in, Head Height 0.098 in, Drive Size #2, Tensile Strength 60,900 psi, Dimensional Standards ASME B18.6.3, Pack Size Small, Minimum Thread Length Not Applicable, Type Machine Screw, Washer Outside Diameter Not Applicable, Washer Thickness Not Applicable, Maximum Head Width 25/64 in, Minimum Head Width Not Applicable, Maximum Head Height 7/64 in
| System of Measurement | Inch |
|---|---|
| Thread Size | #10-32 |
| Fastener Length | 2-1/2 in |
| Head Type | Flat |
| Drive | Phillips |
| Drive Size | #2 |
| Material | Steel |
| Finish | Zinc Plated |
| Tensile Strength | 60,900 psi |
| Standards | ASME B18.6.3 |
| Item | Machine Screw |
| Head Angle (Deg.) | 82 |
| Rockwell Hardness | B70 |
| Head Height | 0.098 in |
| Package Quantity | 100 |
| Head Dia. | 0.333 in |
| Washer Type | Not Applicable |
| Washer Thickness | Not Applicable |
| Thread Type | Fine |
| Screw Size | #10 |
| Dimensional Standards | ASME B18.6.3 |
| Head Width | 0.333 in |
| Thread Fit | 2A, 3A |
| Pack Size | Small |
| Thread Style | Fully Threaded |
| Minimum Thread Length | Not Applicable |
| Overall Length | 2-1/2 in |
| Type | Screw |
| O-Ring Temperature - Maximum | Not Applicable |
| Maximum Head Width | 25/64 in |
| Maximum Head Height | 7/64 in |
| O-Ring Material | Not Applicable |
| O-Ring Pressure Rating | Not Applicable |
| Minimum Head Height | Not Applicable |
| O-Ring Temperature - Minimum | Not Applicable |
| Recommended Hole Size | Not Applicable |
| Minimum Head Width | Not Applicable |
| Made in North America | Not Made in North America |
| Washer Outside Diameter | Not Applicable |
| Wire Rope Length | 2-1/2 in |
| Length | 2-1/2 in |
| Shell Material | Steel |
| Country of Origin (subject to change) | Viet Nam |