Machine Screw, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Slotted, Thread Size 1/2 In.-13, Fastener Length 1 1/4 in, Head Width 0.815 in, Head Height 0.815 in, Drive Size Not Applicable, Tensile Strength 60,000 psi, Dimensional Standards ASME B18.6.3, Pack Size Small, Minimum Thread Length Not Applicable, Type Machine Screw, Washer Outside Diameter Not Applicable, Washer Thickness Not Applicable, Maximum Head Width 13/16 in, Minimum Head Width Not Applicable
| System of Measurement | Inch |
|---|---|
| Thread Size | 1/2"-13 |
| Fastener Length | 1-1/4 in |
| Head Type | Flat |
| Drive | Slotted |
| Drive Size | Not Applicable |
| Material | Steel |
| Finish | Zinc Plated |
| Tensile Strength | 60,000 psi |
| Standards | ASME B18.6.3 |
| Item | Machine Screw |
| Head Dia. | 0.815 in |
| Package Quantity | 50 |
| Head Height | 0.815 in |
| Head Angle (Deg.) | 82 |
| Washer Thickness | Not Applicable |
| Thread Fit | 2A, 3A |
| Maximum Head Height | 7/64 in |
| Head Width | 0.815 in |
| Thread Type | Coarse |
| Thread Direction | Right Hand |
| Washer Outside Diameter | Not Applicable |
| Pack Size | Small |
| Thread Style | Fully Threaded |
| Minimum Head Width | Not Applicable |
| Dimensional Standards | ASME B18.6.3 |
| Minimum Thread Length | Not Applicable |
| Minimum Head Height | Not Applicable |
| Maximum Head Width | 13/16 in |
| Screw Size | 1/2 in |
| Type | Screw |
| Shell Material | Steel |
| Country of Origin (subject to change) | Multiple |