Socket Flat Head Screw, Head Type Flat, System of Measurement Inch, Drive Type Socket, Drive Size Not Available, Material Steel, Finish Zinc Plated, Thread Size 1/2 In.-20, Minimum Thread Length 1 1/2 in, Fastener Length 1 1/2 in, Pack Size Small Pack, Special Features Not Applicable, Countersink Angle 82 Degrees , Dimensional Standards ASME B18.3, Flange Diameter Not Applicable, Flange Thickness Not Applicable, Package Quantity 10
| Item | Socket Head Cap Screw |
|---|---|
| Thread Size | 1/2"-20 |
| Screw Length | 1-1/2 in |
| Material | Alloy Steel |
| Finish | Zinc Plated |
| Head Type | Flat |
| Drive Type | Hex |
| Drive Size | 5/16 in |
| Tensile Strength | 144,000 psi |
| Standards | ASME B18.3 |
| System of Measurement | Inch |
| Head Angle (Deg.) | 82 |
| Thread Direction | Right Hand |
| Thread Length | 1-1/2 in |
| Fastener Thread Type | UNF (Fine) |
| Thread Style | Partially Threaded |
| Rockwell Hardness | C39 to C44 |
| Min. Thread Length | 1-1/2 in |
| Thread Type | Fine |
| Dimensional Standards | ASME B18.3 |
| Special Features | Not Applicable |
| Vent Hole Diameter | Not Applicable |
| Flange Diameter | Not Applicable |
| Countersink Angle | 82 deg |
| Minimum Thread Length | 1-1/2 in |
| Thread Pitch | Not Applicable |
| Flange Thickness | Not Applicable |
| Pack Size | Small Pack |
| Basic Material | Steel |
| Fastener Industry Standards | ASME B18.3 |
| Length | 1-1/2 in |
| Fastener Finish | Zinc Plated |
| Material Grade | Alloy Steel |
| Screw Head Type | Flat |
| Screw Style | Socket Head Cap Screw |
| Dia./Thread Size | 1/2"-20 |
| Min. Tensile Strength | 144 ksi |
| Fastener Length | 1-1/2 in |
| Head Diameter | 3/4 in |
| Head Height | 1/2 in |
| Shell Material | Alloy Steel |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 10 |