Straight Flute Drill Bit, Drill Bit Size 13/32 in, 125 Degrees Drill Bit Point Angle, Material - Machining Carbide Tipped, Finish - Machining Bright (Uncoated), Decimal Equivalent 0.4062, Fractional Inch, 4 Facet Point Drill Bit Point Type, Flute Length 3 7/8 in
| Item | Straight Flute Drill Bit |
|---|---|
| Overall Length | 6-9/32 in |
| Drill Bit Size | 13/32 in |
| Drill Bit Point Angle | 125 deg |
| Flute Length | 3-7/8 in |
| Number of Flutes | 2 |
| Decimal Equivalent | 0.4062 |
| Drill Bit Material | Carbide Tipped |
| Drill Bit Finish | Uncoated |
| Cutting Direction | Right Hand |
| Point Type | 4 Facet |
| Coolant Through | Yes |
| Material | Carbide-Tipped |
| Drill Bit Dimension Type | Fractional Inch |
| Depth:Dia. Ratio | 8 xD |
| Shank Dia. | 13/32 in |
| Depth x Dia. Ratio | 8 xD |
| Drill Bit Grouping | Drill Bit |
| Standards | Not Rated |
| Helix Angle | 0 Degrees |
| Coolant Fed | Non-Coolant Through |
| Shank Length | 2.4 in |
| Drilling Depth | 2.9 in |
| Flute Type | Straight |
| Primary Material Application | All Materials |
| Shank Type - Machining | Straight |
| Finish - Machining | Bright |
| Drill Bit Point Type | 4 Facet Point |
| Aircraft Drill | No |
| Material - Machining | Carbide Tipped |
| Primary Material Application ISO Code | K, P, H, N |
| Drill Point Length | 0.11 mm |
| Maximum Drilling Depth | 3-7/8 in |
| Measurement System | Fractional Inch |
| Drill Diameter Tolerance | +0.0000 in/-0.0010 in |
| Number of Coolant Holes | 2 |
| Drill Length Class | Jobber-Length |
| Spiral Direction | Right Hand |
| Wire Rope Length | 6-9/32 in |
| Length | 6-9/32 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |