Jobber Length Drill Bit, Drill Bit Size 29/64 in, Drill Bit Point Angle 135 Degrees , Cobalt, Straw/Bronze, Decimal Equivalent 0.4531, Fractional Inch, Drill Bit Point Type Split Point, Non-Coolant Through, Number of Coolant Holes 0
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 5-5/8 in |
| Drill Bit Point Angle | 135 deg |
| Drill Bit Size | 29/64 in |
| Number of Flutes | 2 |
| Shank Dia. | 29/64 in |
| Material - Machining | Cobalt |
| Cutting Direction | Right Hand |
| Finish - Machining | Bronze, Straw |
| Shank Type - Machining | Straight |
| Drill Bit Dimension Type | Fractional Inch |
| Standards | ANSI |
| Drill Bit Grouping | Drill Bit |
| Number of Pieces | 0 |
| Flute Type | Spiral |
| Application | For Cast Iron, High Temperature Alloys, Stainless Steel And Titanium |
| Flute Length | 4-3/16 in |
| Decimal Equivalent | 0.4531 |
| List Number | Westward |
| Coolant Fed | Non-Coolant Through |
| Maximum Drilling Depth | 3-3/32 in |
| Drill Length Class | Jobber-Length |
| Measurement System | Fractional Inch |
| Drill Bit Point Type | Split Point |
| Material Grade - Machining | High Performance |
| Depth:Dia. Ratio | 4 xD |
| Shank Length | 1-7/16 in |
| Spiral Direction | Right Hand |
| Primary Material Application | Brass, Bronze, Copper, Cast Iron, Aluminum, Hardened Steel, Steel |
| Primary Material Application ISO Code | P, K, N, S, H |
| Sheeter Drill | No |
| Helix Angle | 21 Degrees to 34 Degrees |
| Drill Diameter Tolerance | +0.0000 in/-0.0010 in |
| Number of Coolant Holes | 0 |
| Web Thinning | Thinned |
| Aircraft Drill | No |
| Secondary Material Application ISO Code | N |
| Helix Angle - Minimum | 21 deg |
| Secondary Material Application | Aluminum, Brass, Bronze, Copper |
| Helix Angle - Maximum | 34 deg |
| Wire Rope Length | 5-5/8 in |
| Length | 5-5/8 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |