Straight Flute Drill Bit, Drill Bit Size 29/64 in, 118 Degrees Drill Bit Point Angle, Material - Machining Carbide Tipped, Finish - Machining Bright (Uncoated), Decimal Equivalent 0.4531, Fractional Inch, Cam Relieved Point Drill Bit Point Type, Flute Length 3 1/4 in
| Item | Straight Flute Drill Bit |
|---|---|
| Overall Length | 5-3/4 in |
| Drill Bit Size | 29/64 in |
| Drill Bit Point Angle | 118 deg |
| Flute Length | 3-1/4 in |
| Number of Flutes | 2 |
| Decimal Equivalent | 0.4531 |
| Drill Bit Material | Carbide Tipped |
| Drill Bit Finish | Uncoated |
| Material | Carbide-Tipped |
| Point Type | Cam Relieved, Notch Thinned |
| Shank Dia. | 7/16 in |
| Drill Bit Dimension Type | Fractional Inch |
| Cutting Direction | Right Hand |
| Coolant Through | No |
| Depth:Dia. Ratio | 3 xD |
| Standards | Not Rated |
| Drill Bit Point Type | Cam Relieved Point |
| Helix Angle | 0 Degrees |
| Maximum Drilling Depth | 3-1/4 in |
| Finish - Machining | Bright |
| Primary Material Application ISO Code | K, P, H, N |
| Drill Length Class | Jobber-Length |
| Drill Diameter Tolerance | +0.0000 in/-0.0015 in |
| Aircraft Drill | No |
| Flute Type | Straight |
| Measurement System | Fractional Inch |
| Drill Point Length | 3.45 mm |
| Coolant Fed | Non-Coolant Through |
| Shank Length | 2-1/2 in |
| Primary Material Application | All Materials |
| Material - Machining | Carbide Tipped |
| Shank Type - Machining | Straight |
| Spiral Direction | Right Hand |
| Wire Rope Length | 5-3/4 in |
| Length | 5-3/4 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |