Socket Flat Head Screw, Head Type Flat, System of Measurement Inch, Drive Type Socket, Drive Size 3/16 in, Material Steel, Finish Black Oxide, Thread Size 5/16 In.-18, Minimum Thread Length 1 1/8 in, Fastener Length 4 in, Head Height 0.198 in, Head Diameter 0.656 in, Pack Size Small Pack, Thread Style Partially Threaded, Special Features Not Applicable, Countersink Angle 82 Degrees , Dimensional Standards ASME B18.3, Flange Diameter Not Applicable, Flange Thickness Not Applicable
| Item | Socket Head Cap Screw |
|---|---|
| Thread Size | 5/16"-18 |
| Screw Length | 4 in |
| Material | Steel |
| Finish | Black Oxide |
| Head Type | Flat |
| Drive Type | Hex |
| Drive Size | 3/16 in |
| Tensile Strength | 135,000 psi |
| Standards | ASME B18.3 |
| System of Measurement | Inch |
| Thread Direction | Right Hand |
| Thread Length | 1-1/8 in |
| Vented Hole Size | Not Vented |
| Head Angle (Deg.) | 82 |
| Fastener Thread Type | UNC (Coarse) |
| Thread Style | Partially Threaded |
| Temp. Range | -58 to 302 deg F |
| Rockwell Hardness | C37 to C44 |
| Head Height | 0.198 in |
| Thread Type | Coarse |
| Package Quantity | 10 |
| Min. Thread Length | 1-1/8 in |
| Flange Thickness | Not Applicable |
| Countersink Angle | 82 deg |
| Minimum Thread Length | 1-1/8 in |
| Head Diameter | 0.656 in |
| Maximum Temperature | 302 deg F |
| Thread Pitch | Not Applicable |
| Vent Hole Diameter | Not Applicable |
| Dimensional Standards | ASME B18.3 |
| Flange Diameter | Not Applicable |
| Minimum Temperature | -58 deg F |
| Special Features | Not Applicable |
| Pack Size | Small Pack |
| Material Grade | Alloy Steel |
| Screw Head Type | Flat |
| Fastener Industry Standards | ASME B18.3 |
| Head Dia. | 0.656 in |
| Screw Style | Socket Head Cap Screw |
| Min. Tensile Strength | 135,000 psi |
| Fastener Finish | Black Oxide |
| Length | 4 in |
| Dia./Thread Size | 5/16"-18 |
| Basic Material | Steel |
| Fastener Length | 4 in |
| Head Texture | Smooth |
| Type | Socket Head Cap Screw |
| Temperature - Maximum | 302 deg F |
| Temperature - Minimum | -58 deg F |
| Non-Marring Tip | No |
| Sealing Gasket | No |
| Shell Material | Alloy Steel |
| Country of Origin (subject to change) | Multiple |