Machine Screw, Head Type Flat, Material Steel, Finish Zinc-Plated, Drive Phillips, Thread Size 5/16 In.-18, Fastener Length 2 1/2 in, Head Width 0.579 in, Head Height 0.597 in, Drive Size #4, Tensile Strength 60,000 psi, Dimensional Standards ASME B18.6.3, Pack Size Small, Minimum Thread Length Not Applicable, Type Machine Screw, Washer Outside Diameter Not Applicable, Washer Thickness Not Applicable, Maximum Head Width 37/64 in, Minimum Head Width Not Applicable, Maximum Head Height 19/32 in
| System of Measurement | Inch |
|---|---|
| Thread Size | 5/16"-18 |
| Fastener Length | 2-1/2 in |
| Head Type | Flat |
| Drive | Phillips |
| Drive Size | #4 |
| Material | Steel |
| Finish | Zinc Plated |
| Tensile Strength | 60,000 psi |
| Standards | ASME B18.6.3 |
| Item | Machine Screw |
| Head Dia. | 0.556 in |
| Head Height | 0.597 in |
| Head Angle (Deg.) | 82 |
| Rockwell Hardness | B69 to B100 |
| Package Quantity | 100 |
| Washer Thickness | Not Applicable |
| Thread Style | Fully Threaded |
| Thread Fit | 2A, 3A |
| Maximum Head Height | 19/32 in |
| Washer Outside Diameter | Not Applicable |
| Head Width | 0.579 in |
| Pack Size | Small |
| Thread Direction | Right Hand |
| Minimum Thread Length | Not Applicable |
| Minimum Head Height | Not Applicable |
| Minimum Head Width | Not Applicable |
| Maximum Head Width | 37/64 in |
| Dimensional Standards | ASME B18.6.3 |
| Screw Size | 5/16 in |
| Thread Type | Coarse |
| Type | Screw |
| Shell Material | Steel |
| Country of Origin (subject to change) | Multiple |