Jobber Length Drill Bit, Drill Bit Size 4.5 mm, Drill Bit Point Angle 118 Degrees , Carbide, Bright (Uncoated), Decimal Equivalent 0.1772, Metric, Drill Bit Point Type 4 Facet Point, Non-Coolant Through
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 70 mm |
| Drill Bit Point Angle | 118 deg |
| Drill Bit Size | 4.5 mm |
| Number of Flutes | 2 |
| Shank Dia. | 4.5 mm |
| Material - Machining | Carbide |
| Cutting Direction | Right Hand |
| Finish - Machining | Bright |
| Shank Type - Machining | Straight |
| Decimal Equivalent | 0.1772 |
| Flute Type | Spiral |
| Application | Metalworking |
| Flute Length | 41 mm |
| Depth:Dia. Ratio | 9 xD |
| Drill Bit Grouping | Drill Bit |
| Drill Bit Dimension Type | Metric |
| List Number | 450 |
| Standards | Not Rated |
| Coolant Fed | Non-Coolant Through |
| Helix Angle | 25 deg |
| Drilling Depth | 41 mm |
| Web Construction | Split |
| Drill Bit Point Type | 4 Facet Point |
| Measurement System | Metric |
| Material Grade - Machining | C2 |
| Spiral Direction | Right Hand |
| Maximum Drilling Depth | 1-39/64 in |
| Primary Material Application | Materials |
| Shank Length | 29 mm |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Web Thinning | Thinned |
| Primary Material Application ISO Code | P, K, N, M, S, H, O |
| Drill Length Class | Jobber-Length |
| Helix Angle - Maximum | 25 deg |
| Helix Angle - Minimum | Not Applicable |
| Wire Rope Length | 70 mm |
| Length | 70 mm |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |