Jobber Length Drill Bit, Drill Bit Size 7.5 mm, Drill Bit Point Angle 118 Degrees , Carbide, TiN, Decimal Equivalent 0.2953, Metric, Drill Bit Point Type 4 Facet Point, Non-Coolant Through
| Item | Jobber Length Drill Bit |
|---|---|
| Overall Length | 95 mm |
| Drill Bit Point Angle | 118 deg |
| Drill Bit Size | 7.5 mm |
| Number of Flutes | 2 |
| Shank Dia. | 7.5 mm |
| Material - Machining | Carbide |
| Cutting Direction | Right Hand |
| Finish - Machining | TiN |
| Shank Type - Machining | Straight |
| Depth:Dia. Ratio | 8 xD |
| Decimal Equivalent | 0.2953 |
| Flute Type | Spiral |
| Flute Length | 60 mm |
| Drill Bit Dimension Type | Metric |
| List Number | 450 |
| Drill Bit Grouping | Drill Bit |
| Application | Metalworking |
| Standards | Not Rated |
| Coolant Fed | Non-Coolant Through |
| Helix Angle | 25 deg |
| Drilling Depth | 60 mm |
| Primary Material Application ISO Code | P, K, N, M, S, H, O |
| Measurement System | Metric |
| Shank Length | 35 mm |
| Web Thinning | Thinned |
| Drill Length Class | Jobber-Length |
| Primary Material Application | Materials |
| Drill Diameter Tolerance | +0.0000 in/-0.0005 in |
| Material Grade - Machining | C2 |
| Web Construction | Split |
| Spiral Direction | Right Hand |
| Drill Bit Point Type | 4 Facet Point |
| Maximum Drilling Depth | 2-23/64 in |
| Helix Angle - Minimum | Not Applicable |
| Helix Angle - Maximum | 25 deg |
| Wire Rope Length | 95 mm |
| Length | 95 mm |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |