Backup O-Ring, Material PTFE, Radius Not Applicable, Actual Width 0.086 in, Actual Inside Dia. 1.02 in, Nominal Inside Dia. 1 1/64 in, Actual Outside Dia. 1.192 in, Cross Section Shape Rectangular, Durometer 55D, Durometer (Hardness) Rating Very Hard, Color White, Temp. Range -100 Degrees to 500 Degrees F, Package Quantity 25
| Dash Number | 120 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Rectangular |
| Cross-Section Shape | Rectangular |
| O-Ring Material | PTFE |
| O-Ring Material Compatibility | Water, Carbon Dioxide, Nitrogen, Detergents, Silicone Grease, Hydraulic Oils, Mineral Oil, Vegetable Oils, Natural Gas, Fatty Acids, Gasoline, Lubricating Oils, Kerosene, Diesel Oil, Hydrochloric Acid, Ethanol, Methanol, Bleach, Toluene, Animal Fats, Liquid, Propane Gas, Acids, Sulfuric, Steam, Acetone, Ammonia, Anhydrous |
| Durometer | 55D |
| Color | White |
| Nominal Inside Dia. | 1-1/64 in |
| Actual Inside Dia. | 1.02 in |
| Actual Outside Dia. | 1.192 in |
| X-Ray Dectectable | No |
| Actual Width | 0.086 in |
| Temp. Range | -100 Degrees to 500 Degrees F |
| Item | Backup O-Ring |
| Durometer (Hardness) Rating | Very Hard |
| X-Ray Detectable | No |
| FDA Approved | FDA Compliant |
| Metal Detectable | No |
| Type | O-Ring |
| Material | PTFE |
| Inside Diameter - Nominal | 1 in |
| Radius | Not Applicable |
| Outside Diameter - Nominal | 1-3/16 in |
| Cut Type | Split |
| Inside Diameter - Actual | 1.02 in |
| Operating Temperature - Maximum | 500 deg F |
| Outside Diameter - Actual | 1.19 in |
| Cross-Section Width | 3/32 in |
| Operating Temperature - Minimum | -100 deg F |
| Width - Actual | 0.09 in |
| Shell Material | PTFE |
| Wire Color | White |
| Country of Origin (subject to change) | Italy |
| Package Quantity | 25 |