Backup O-Ring, Material PTFE, Radius Not Applicable, Actual Width 0.053 in, Actual Inside Dia. 0.58 in, Nominal Inside Dia. 37/64 in, Actual Outside Dia. 0.686 in, Cross Section Shape Rectangular, Durometer 55D, Durometer (Hardness) Rating Very Hard, Color White, Temp. Range -100 Degrees to 500 Degrees F, Package Quantity 50
| Dash Number | 015 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Rectangular |
| Cross-Section Shape | Rectangular |
| O-Ring Material | PTFE |
| O-Ring Material Compatibility | Water, Carbon Dioxide, Nitrogen, Detergents, Silicone Grease, Hydraulic Oils, Mineral Oil, Vegetable Oils, Natural Gas, Fatty Acids, Gasoline, Lubricating Oils, Kerosene, Diesel Oil, Hydrochloric Acid, Ethanol, Methanol, Bleach, Toluene, Animal Fats, Liquid, Propane Gas, Acids, Sulfuric, Steam, Acetone, Ammonia, Anhydrous |
| Durometer | 55D |
| Color | White |
| Nominal Inside Dia. | 37/64 in |
| Actual Inside Dia. | 0.58 in |
| Temp. Range | -100 Degrees to 500 Degrees F |
| Durometer (Hardness) Rating | Very Hard |
| Item | Backup O-Ring |
| Actual Outside Dia. | 0.686 in |
| Actual Width | 0.053 in |
| Metal Detectable | No |
| X-Ray Dectectable | No |
| X-Ray Detectable | No |
| FDA Approved | FDA Compliant |
| Type | O-Ring |
| Material | PTFE |
| Outside Diameter - Actual | 0.69 in |
| Radius | Not Applicable |
| Inside Diameter - Actual | 0.58 in |
| Operating Temperature - Maximum | 500 deg F |
| Cut Type | Split |
| Cross-Section Width | 1/16 in |
| Width - Actual | 0.05 in |
| Outside Diameter - Nominal | 11/16 in |
| Operating Temperature - Minimum | -100 deg F |
| Inside Diameter - Nominal | 9/16 in |
| Shell Material | PTFE |
| Wire Color | White |
| Country of Origin (subject to change) | Italy |
| Package Quantity | 50 |