Backup O-Ring, Material PTFE, Radius Not Applicable, Actual Width 0.119 in, Actual Inside Dia. 0.828 in, Nominal Inside Dia. 53/64 in, Actual Outside Dia. 1.066 in, Cross Section Shape Rectangular, Durometer 55D, Durometer (Hardness) Rating Very Hard, Color White, Temp. Range -100 Degrees to 500 Degrees F, Package Quantity 50
| Dash Number | 211 |
|---|---|
| System of Measurement | Inch |
| Cross Section Shape | Rectangular |
| Cross-Section Shape | Rectangular |
| O-Ring Material | PTFE |
| O-Ring Material Compatibility | Water, Carbon Dioxide, Nitrogen, Detergents, Silicone Grease, Hydraulic Oils, Mineral Oil, Vegetable Oils, Natural Gas, Fatty Acids, Gasoline, Lubricating Oils, Kerosene, Diesel Oil, Hydrochloric Acid, Ethanol, Methanol, Bleach, Toluene, Animal Fats, Liquid, Propane Gas, Acids, Sulfuric, Steam, Acetone, Ammonia, Anhydrous |
| Durometer | 55D |
| Color | White |
| Nominal Inside Dia. | 53/64 in |
| Actual Inside Dia. | 0.828 in |
| X-Ray Dectectable | No |
| FDA Approved | FDA Compliant |
| Actual Width | 0.119 in |
| Temp. Range | -100 Degrees to 500 Degrees F |
| X-Ray Detectable | No |
| Durometer (Hardness) Rating | Very Hard |
| Actual Outside Dia. | 1.066 in |
| Item | Backup O-Ring |
| Metal Detectable | No |
| Type | O-Ring |
| Material | PTFE |
| Outside Diameter - Nominal | 1-1/16 in |
| Inside Diameter - Actual | 0.83 in |
| Inside Diameter - Nominal | 13/16 in |
| Cross-Section Width | 1/8 in |
| Width - Actual | 0.12 in |
| Operating Temperature - Maximum | 500 deg F |
| Radius | Not Applicable |
| Outside Diameter - Actual | 1.07 in |
| Operating Temperature - Minimum | -100 deg F |
| Cut Type | Split |
| Shell Material | PTFE |
| Wire Color | White |
| Country of Origin (subject to change) | Italy |
| Package Quantity | 50 |