Ball End Mill, 0.484375 in Milling Dia., Carbide, TiCN, Non-Coolant Through
| Dimension Type | Fractional Inch |
|---|---|
| Milling Diameter | 31/64 in |
| End Mill Material | Carbide |
| Number of Flutes | 2 |
| Length of Cut | 1 in |
| Single End/Double End | Single |
| End Mill Cutting Type | Center Cutting |
| Grade | General Purpose |
| Shank Dia. | 1/2 in |
| Helix Angle | 30 deg |
| Stainless (M) Compatibility | No |
| Cutting Direction | Right Hand |
| End Mill Style | Ball Nose |
| Shank Type | Straight |
| List Number | 219 |
| Hardened (H) Compatibility | No |
| Milling Dia. | 31/64 in |
| Non Ferrous (N) Compatibility | No |
| End Mill Application | Roughing/Finishing |
| Item | Ball End Mill |
| Cast Iron (K) Compatibility | No |
| Overall Length | 3 in |
| Steel (P) Compatibility | No |
| Finish | TiCN |
| Super Alloy (S) Compatibility | No |
| Neck Length | Not Applicable |
| Pitch | Not Applicable |
| Neck Dia. | Not Applicable |
| Finish - Machining | TiCN |
| Chip-Breaker | No |
| Material Grade - Machining | General Purpose |
| Measurement System | Inch |
| Drilling Tool Configuration | Individual |
| Primary Material Application ISO Code | P, K, H, N |
| Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Hardened Steel, Steel, Tool and Die Steel |
| Shank Type - Machining | Weldon Flat |
| Material - Machining | Carbide |
| Coolant Fed | Non-Coolant Through |
| Series | Not Applicable |
| Flute Spacing | Fixed |
| Min. Helix Angle | Not Applicable |
| Flute Type | Spiral |
| Secondary Material Application | Cast Iron, Stainless Steel, Steel |
| Secondary Material Application ISO Code | K, M, P, N |
| Wire Rope Length | 3 in |
| Length | 3 in |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |