Beveled Flat Washer, Flat Washer Type Beveled, Dimensional Standards AMPG 2001 BEV.01, Material Steel, Material Grade/Class Case Hardened, Finish Black Oxide, For Screw Size 1/4 in, Inside Diameter 0.281 in, Outside Diameter 5/8 in, Maximum Thickness 1/8 in, System of Measurement Inch, Minimum Thickness 1/8 in, Inside Diameter Tolerance +/-0.010 in, Material Quality Standards ASTM A108, Outside Diameter Tolerance +/-0.010 in, Pack Size Small Pack, Rockwell Hardness C4
| Item | Beveled Washer |
|---|---|
| Material | Steel |
| Finish | Oiled |
| Fits Bolt Sizes | 1/4 in |
| Thickness | 0.125 in |
| Inside Dia. | 0.281 in |
| System of Measurement | Inch |
| Package Quantity | 25 |
| Rockwell Hardness | 15N80 |
| Thickness Tolerance | +0.005/-0.004 in |
| Fastener Finish | Plain |
| Flat Washer Type | Beveled Flat Washer |
| Washer Outside Dia. | 5/8 in |
| Washer Standards | N/A |
| For Use With | Construction, Machinery, Welding |
| Application | Load Distributing |
| Washer Basic Material | Steel |
| Washer Inside Dia. | 9/32 in |
| Washer Material Grade | Low Carbon |
| Type | Washer |
| Slot Width | Not Applicable |
| Outside Dia. | 0.625 in |
| Outside Diameter | 5/8 in |
| Inside Diameter | 0.281 in |
| For Screw Size | 1/4 in |
| Pack Size | Small Pack |
| Minimum Thickness | 1/8 in |
| Outside Diameter Tolerance | +/-0.010 in |
| Maximum Thickness | 1/8 in |
| Inside Diameter Tolerance | +/-0.010 in |
| Material Grade/Class | Case Hardened |
| Dimensional Standards | AMPG 2001 BEV.01 |
| Material Quality Standards | ASTM A108 |
| Dye Color | Not Applicable |
| Hardness | 4 HRC |
| Washer Width | Not Applicable |
| Slot Depth | Not Applicable |
| Metal Detectable | Not Applicable |
| FDA Approved | Not FDA Approved |
| Washer Length | Not Applicable |
| X-Ray Detectable | Not Applicable |
| Shell Material | Steel |
| Country of Origin (subject to change) | United States |