HDPE Sheet, HDPE, Grade Marine, Plastic Length 4 ft, Plastic Width 24 in, Plastic Thickness 0.5 in, Black, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength 1.1 ft-lb/in, Friction Coefficient 0.31, Water Absorption 0.05 Percent, Temperature Range -100 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 64D
| Item | HDPE Sheet |
|---|---|
| Plastic Material | HDPE |
| Plastic Thickness | 1/2 in |
| Plastic Width | 24 in |
| Plastic Length | 48 in |
| Plastic Color | Black |
| Max. Temp. (F) | 180 |
| Min. Temp. (F) | -100 Degrees F |
| Color | Black |
| Material Type | Marine |
| Operating Temp. Range | -100 to 180 deg F |
| Tensile Strength | 4,000 psi |
| Impact Strength | 1.1 ft-lb/in |
| Plastic Length Tolerance | +/-1 in |
| Grade | Marine |
| Tensile Strength Rating | Poor |
| Wear Factor | Good |
| UV Resistant | Yes |
| Plastic Hardness Rating | Medium |
| Friction Coefficient | 0.31 |
| Water Absorption Rating | Excellent |
| Plastic Clarity | Opaque |
| Shape | Rectangle |
| Minimum Temperature | -100 deg F |
| Water Absorption | 0.05% |
| Backing Type | No Backing |
| Maximum Temperature | 180 deg F |
| Plastic Thickness Tolerance | +/-0.043 in |
| Plastic Density | 0.034 lb/cu in |
| Corrosion and Chemical Resistance | Good |
| Material | HDPE |
| Friction Rating | Slippery |
| Temperature Range | -100 to 180 deg F |
| Plastic Width Tolerance | +/-1 in |
| Nominal Size | 24 in W x 48 in L |
| Machinability | Not Rated |
| Plastic Hardness | 64D |
| Impact Strength Rating | Poor |
| Maximum Adhesive Temperature | Not Applicable |
| Standards | Not Rated |
| Minimum Adhesive Temperature | Not Applicable |
| Rockwell Hardness | 50 HRM |
| Dielectric Strength | Not Rated |
| Static-Resistant | Not Static-Resistant |
| UL 752 Ballistic Rating | Not Applicable |
| Product Type | Plastic Sheet |
| FDA Compliance | Not FDA Compliant |
| Metal Detectable | No |
| Product Form | Sheet |
| Fabrication | Not Applicable |
| Light Transmission | Not Applicable |
| Wear Rate | Not Rated |
| Filler Material | Not Applicable |
| Weight | 24.77 lb |
| Scratch-Resistant | Not Scratch-Resistant |
| Elongation | Not Rated |
| Flexural Modulus | Not Rated |
| Shore Hardness | 64 Shore D |
| UV-Resistant | UV-Resistant |
| Number of Walls | Not Applicable |
| Coefficient of Thermal Expansion | Not Rated |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |