UHMW Polyethylene Bar, UHMW Polyethylene, Antistatic, Plastic Length 4 ft, Plastic Width 0.75 in, Plastic Thickness 0.1875 in, Black, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.036 lb/cu in, Corrosion and Chemical Resistance Good
| Item | UHMW Polyethylene Bar |
|---|---|
| Material | UHMW Polyethylene |
| Color | Black |
| Length | 4 ft |
| Width | 0.75 in |
| Shape | Rectangular |
| Tensile Strength Rating | Poor |
| Grade | Antistatic |
| Temp. Range | -20 to 180 deg F |
| Tensile Strength | 4,400 psi |
| Durometer | Shore D60 |
| Thickness | 0.187 in |
| Standards | UL 94 HB |
| Wear Factor | Excellent |
| Plastic Thickness Tolerance | +0.007/-0.005 in |
| Friction Rating | Very Slippery |
| Minimum Temperature | -20 deg F |
| Impact Strength Rating | Excellent |
| Plastic Width | 0.75 in |
| Plastic Clarity | Opaque |
| Water Absorption | 0.01% |
| Water Absorption Rating | Excellent |
| Plastic Length Tolerance | +/-1 in |
| Plastic Hardness Rating | Medium |
| Plastic Density | 0.036 lb/cu in |
| Maximum Temperature | 180 deg F |
| Temperature Range | -20 to 180 deg F |
| UV Resistant | No |
| Plastic Hardness | 60D |
| Plastic Width Tolerance | +/-0.250 in |
| Impact Strength | 16 ft-lb/in |
| Nominal Size | 3/4 in W x 48 in L |
| Corrosion and Chemical Resistance | Good |
| Machinability | 100 % |
| Plastic Thickness | 3/16 in |
| Plastic Length | 4 ft |
| Friction Coefficient | 0.15 |
| Backing Type | No Backing |
| FDA Compliance | Not FDA Compliant |
| Static-Resistant | Static-Resistant |
| Metal Detectable | Not Metal Detectable |
| Shore Hardness | 60 Shore D |
| Weight | 0.25 lb |
| Light Transmission | Not Applicable |
| Rockwell Hardness | 45 HRM |
| Scratch-Resistant | Not Scratch-Resistant |
| Wear Rate | Not Rated |
| Coefficient of Thermal Expansion | Not Rated |
| Flexural Modulus | 400 MPa |
| Minimum Adhesive Temperature | Not Applicable |
| Dielectric Strength | 88 kV/mm |
| Maximum Adhesive Temperature | Not Applicable |
| Filler Material | Not Applicable |
| Fabrication | Not Applicable |
| UV-Resistant | Not UV-Resistant |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |