The ZORO SELECT - PS-UHMW-RCY-15 is a Sheet Stock type of plastic sheet, designed for versatility and durability in various industrial applications. Made from UHMW material, this black-colored sheet can be cut, shaped or molded to meet specific project requirements. Its Tivar Eco Recycled grade indicates its unique properties suitable for different industrial uses.
- Corrosion and Chemical Resistance: The sheet is designed to resist certain corrosive substances, chemicals or harsh environmental conditions.
- Friction Coefficient and Rating: With a friction coefficient of 0.14 and a very slippery rating, it's intended to offer lower resistance when sliding against other objects.
- Impact Strength and Rating: The 'No Break' impact strength along with an excellent rating suggests that the sheet may be able to endure high force or shock without breaking.
- Machinability: This attribute indicates that the plastic sheet is designed for cutting, shaping or finishing using industrial tools; however results may vary based on tool usage and handling.
- Temperature Range: It's rated for operation within a temperature range of -22 Degrees to 180 Degrees F; performance may vary depending on actual operating conditions.
- Tensile Strength: Although it has a tensile strength rated at 4,000 psi which suggests limited ability in resisting stress before potential breakage
- Water Absorption Rate & Wear Factor: With its water absorption rate specified at only 0.01%, this product is designed for minimal water absorption and slow deterioration under frictional forces; actual performance may vary."
| Item | Sheet Stock |
|---|---|
| Plastic Material | UHMW |
| Plastic Thickness | 1/2 in |
| Plastic Width | 12 in |
| Plastic Length | 12 in |
| Plastic Color | Black |
| Max. Temp. (F) | 180 |
| Min. Temp. (F) | -22 Degrees F |
| Color | Black |
| Material Type | Tivar Eco Recycled |
| Plastic Grouping | Sheet Stock |
| Thickness Tolerance | +/-10% |
| Length Tolerance | +/-0.250 in |
| Width Tolerance | +/-0.25 in |
| Operating Temp. Range | -22 to 180 deg F |
| Material Color Family | Black |
| Plastic Properties | Chemical/Corrosion Resistant, Non-Friction Surface, Moisture Resistant, Oil Resistant, UV Tolerant, Wear Material |
| Tensile Strength | 4,000 psi |
| Thickness | 1/2 in |
| Elongation | 270 % |
| Length | 12" |
| Backing Type | No Backing |
| Material | UHMW Polyethylene |
| Width | 12" |
| Standards | Not Rated |
| Plastic Clarity | Opaque |
| Plastic Width Tolerance | +/-1/4 in |
| Corrosion and Chemical Resistance | Good |
| Friction Coefficient | 0.14 |
| Plastic Hardness | 67D |
| Plastic Length Tolerance | +/-1/4 in |
| UV Resistant | No |
| Nominal Size | 12 in W x 12 in L |
| Water Absorption | 0.01% |
| Plastic Thickness Tolerance | +/-10% |
| Temperature Range | -22 to 180 deg F |
| Shape | Square |
| Maximum Temperature | 180 deg F |
| Plastic Hardness Rating | Medium |
| Machinability | 100 % |
| Friction Rating | Very Slippery |
| Water Absorption Rating | Excellent |
| Wear Factor | Excellent |
| Impact Strength Rating | Excellent |
| Grade | Standard |
| Impact Strength | No Break |
| Minimum Temperature | -22 deg F |
| Tensile Strength Rating | Poor |
| Maximum Adhesive Temperature | Not Applicable |
| Minimum Adhesive Temperature | Not Applicable |
| Plastic Density | 0.033 lb/cu in |
| Metal Detectable | No |
| Weight | 3.95 lb |
| Filler Material | Not Applicable |
| Wear Rate | Not Rated |
| UV-Resistant | Not UV-Resistant |
| Number of Walls | Not Applicable |
| Fabrication | Not Applicable |
| Coefficient of Thermal Expansion | Not Rated |
| UL 752 Ballistic Rating | Not Applicable |
| Static-Resistant | Not Static-Resistant |
| Product Type | Plastic Sheet |
| Scratch-Resistant | Not Scratch-Resistant |
| Dielectric Strength | 86 kV/mm |
| Flexural Modulus | 400 MPa |
| FDA Compliance | Not FDA Compliant |
| Rockwell Hardness | 60 HRM |
| Light Transmission | Not Applicable |
| Shore Hardness | 67 Shore D |
| Product Form | Sheet |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |