Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 24 in, Plastic Thickness 0.375 in, Black, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength No Break, Friction Coefficient 0.14, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.033 lb/cu in, Plastic Hardness 67D
| Item | Sheet Stock |
|---|---|
| Plastic Material | UHMW |
| Plastic Thickness | 3/8 in |
| Plastic Width | 24 in |
| Plastic Length | 24 in |
| Plastic Color | Black |
| Max. Temp. (F) | 180 |
| Min. Temp. (F) | -22 Degrees F |
| Color | Black |
| Material Type | Tivar Eco Recycled |
| Plastic Grouping | Sheet Stock |
| Plastic Properties | Chemical/Corrosion Resistant, Non-Friction Surface, Moisture Resistant, Oil Resistant, UV Tolerant, Wear Material |
| Length Tolerance | +/-0.250 in |
| Thickness Tolerance | +/-10% |
| Width Tolerance | +/-0.25 in |
| Material Color Family | Black |
| Tensile Strength | 4,000 psi |
| Operating Temp. Range | -22 to 180 deg F |
| Thickness | 3/8 in |
| Backing Type | No Backing |
| Elongation | 270 % |
| Standards | Not Rated |
| Width | 24" |
| Length | 24" |
| Material | UHMW Polyethylene |
| Machinability | 100 % |
| Impact Strength | No Break |
| UV Resistant | No |
| Plastic Width Tolerance | +/-1/4 in |
| Nominal Size | 24 in W x 24 in L |
| Temperature Range | -22 to 180 deg F |
| Wear Factor | Excellent |
| Friction Rating | Very Slippery |
| Plastic Thickness Tolerance | +/-10% |
| Grade | Standard |
| Maximum Temperature | 180 deg F |
| Plastic Hardness Rating | Medium |
| Friction Coefficient | 0.14 |
| Plastic Hardness | 67D |
| Corrosion and Chemical Resistance | Good |
| Shape | Square |
| Minimum Temperature | -22 deg F |
| Water Absorption Rating | Excellent |
| Water Absorption | 0.01% |
| Tensile Strength Rating | Poor |
| Impact Strength Rating | Excellent |
| Plastic Clarity | Opaque |
| Plastic Length Tolerance | +/-1/4 in |
| Minimum Adhesive Temperature | Not Applicable |
| Plastic Density | 0.033 lb/cu in |
| Maximum Adhesive Temperature | Not Applicable |
| Number of Walls | Not Applicable |
| Fabrication | Not Applicable |
| Coefficient of Thermal Expansion | Not Rated |
| Metal Detectable | No |
| Scratch-Resistant | Not Scratch-Resistant |
| Filler Material | Not Applicable |
| Product Type | Plastic Sheet |
| Weight | 8.85 lb |
| UL 752 Ballistic Rating | Not Applicable |
| Rockwell Hardness | 60 HRM |
| Light Transmission | Not Applicable |
| Flexural Modulus | 400 MPa |
| Shore Hardness | 67 Shore D |
| Dielectric Strength | 86 kV/mm |
| Static-Resistant | Not Static-Resistant |
| Wear Rate | Not Rated |
| Product Form | Sheet |
| UV-Resistant | Not UV-Resistant |
| FDA Compliance | Not FDA Compliant |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |