The ZORO SELECT - PS-UHMW-RCY-3 is a Sheet Stock type of plastic sheet, designed for industrial use. Made from UHMW material and classified as Tivar Eco Recycled grade, this sheet stock is intended for use in a variety of applications. It can be cut, shaped or molded into different forms depending on the specific requirements of the project.
- Corrosion and Chemical Resistance: With good resistance to corrosion and chemicals, this plastic sheet has been tested for resistance against certain chemicals and conditions.
- Friction Coefficient: The friction coefficient is 0.14 indicating low resistance when sliding against another object.
- Impact Strength: It is rated as 'No Break' on the impact strength scale, indicating its potential suitability for high-force applications.
- Machinability: This product is noted for its machinability, suggesting that with appropriate tools and techniques, it may be cut or shaped according to project requirements.
- Temperature Range: The specified operating temperature range of this plastic sheet is -22 degrees F to 180 degrees F. Performance outside these ranges may vary.
- Tensile Strength: While the tensile strength rating indicates a maximum stress limit of 4,000 psi before potential breakage when stretched or pulled occurs, other properties might contribute positively depending on specific application requirements where tensile strength isn't critical
| Item | Sheet Stock |
|---|---|
| Plastic Material | UHMW |
| Plastic Thickness | 1/4 in |
| Plastic Width | 12 in |
| Plastic Length | 48 in |
| Plastic Color | Black |
| Max. Temp. (F) | 180 |
| Min. Temp. (F) | -22 Degrees F |
| Color | Black |
| Tensile Strength | 4,000 psi |
| Length Tolerance | +/-0.250 in |
| Width Tolerance | +/-0.25 in |
| Plastic Properties | Chemical/Corrosion Resistant, Non-Friction Surface, Moisture Resistant, Oil Resistant, UV Tolerant, Wear Material |
| Thickness Tolerance | +/-10% |
| Material Type | Tivar Eco Recycled |
| Plastic Grouping | Sheet Stock |
| Operating Temp. Range | -22 to 180 deg F |
| Material Color Family | Black |
| Thickness | 1/4 in |
| Standards | Not Rated |
| Material | UHMW Polyethylene |
| Length | 48" |
| Backing Type | No Backing |
| Width | 12" |
| Elongation | 270 % |
| Minimum Temperature | -22 deg F |
| Tensile Strength Rating | Poor |
| Impact Strength Rating | Excellent |
| Grade | Standard |
| Plastic Hardness Rating | Medium |
| Shape | Rectangle |
| Plastic Clarity | Opaque |
| Plastic Length Tolerance | +/-1/4 in |
| Water Absorption Rating | Excellent |
| Temperature Range | -22 to 180 deg F |
| Water Absorption | 0.01% |
| UV Resistant | No |
| Machinability | 100 % |
| Impact Strength | No Break |
| Corrosion and Chemical Resistance | Good |
| Friction Coefficient | 0.14 |
| Friction Rating | Very Slippery |
| Maximum Temperature | 180 deg F |
| Wear Factor | Excellent |
| Plastic Width Tolerance | +/-1/4 in |
| Plastic Thickness Tolerance | +/-10% |
| Nominal Size | 12 in W x 48 in L |
| Plastic Hardness | 67D |
| Minimum Adhesive Temperature | Not Applicable |
| Maximum Adhesive Temperature | Not Applicable |
| Plastic Density | 0.033 lb/cu in |
| UL 752 Ballistic Rating | Not Applicable |
| Shore Hardness | 67 Shore D |
| Filler Material | Not Applicable |
| Wear Rate | Not Rated |
| Fabrication | Not Applicable |
| Flexural Modulus | 400 MPa |
| UV-Resistant | Not UV-Resistant |
| Rockwell Hardness | 60 HRM |
| Number of Walls | Not Applicable |
| Product Form | Sheet |
| FDA Compliance | Not FDA Compliant |
| Light Transmission | Not Applicable |
| Product Type | Plastic Sheet |
| Metal Detectable | No |
| Weight | 6.4 lb |
| Scratch-Resistant | Not Scratch-Resistant |
| Static-Resistant | Not Static-Resistant |
| Dielectric Strength | 86 kV/mm |
| Coefficient of Thermal Expansion | Not Rated |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |