Nylon Sheet, Nylon, Grade Enhanced Temperature, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 1 in, Blue, Plastic Clarity Opaque, Tensile Strength 11,000 psi, Impact Strength 0.4 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.72 Percent, Temperature Range 32 Degrees to 260 Degrees F, Plastic Density 1.15 g/cc, Plastic Hardness 85D
| Item | Sheet Stock |
|---|---|
| Plastic Material | Cast Nylon |
| Plastic Thickness | 1 in |
| Plastic Width | 12 in |
| Plastic Length | 12 in |
| Plastic Color | Blue |
| Max. Temp. (F) | 200 |
| Min. Temp. (F) | 32 Degrees F |
| Color | Blue |
| Tensile Strength | 11,000 psi |
| Width Tolerance | +/-0.25 in |
| Plastic Properties | Flame Retardant, Wear Material |
| Material Color Family | Blue |
| Plastic Grouping | Sheet Stock |
| Thickness Tolerance | +/-10% |
| Operating Temp. Range | 32 to 200 deg F |
| Material Type | Heat Stabilized |
| Length Tolerance | +/-0.250 in |
| Width | 12" |
| Thickness | 1 in |
| Length | 12" |
| Material | Nylon |
| Minimum Temperature | -22 deg F |
| Friction Coefficient | 0.2 |
| Tensile Strength Rating | Excellent |
| Plastic Clarity | Opaque |
| Maximum Temperature | 260 deg F |
| Plastic Thickness Tolerance | +/-10% |
| Plastic Width Tolerance | +/-1/4 in |
| Machinability | 80 % |
| Plastic Length Tolerance | +/-1/4 in |
| Wear Factor | Excellent |
| Water Absorption | 0.72% |
| Temperature Range | 32 to 260 deg F |
| Friction Rating | Very Slippery |
| Impact Strength | 0.4 ft-lb/in |
| Plastic Hardness Rating | Hard |
| Shape | Square |
| Corrosion and Chemical Resistance | Fair |
| Water Absorption Rating | Poor |
| Impact Strength Rating | Poor |
| Grade | Enhanced Temperature |
| Plastic Hardness | 85D |
| Nominal Size | 12 in W x 12 in L |
| UV Resistant | No |
| Maximum Adhesive Temperature | 260 deg F |
| Backing Type | Not Applicable |
| Standards | 3-A Dairy |
| Plastic Density | 1.15 g/cc |
| Minimum Adhesive Temperature | 140 deg F |
| Shore Hardness | 85 Shore D |
| Wear Rate | 1.08 x 10^-4 cu mm/N-m |
| Number of Walls | Not Applicable |
| Coefficient of Thermal Expansion | 80 x 10^-6 m/[m-K] |
| Dielectric Strength | 500 V/mil |
| Metal Detectable | No |
| Product Form | Sheet |
| Elongation | 20 % |
| Static-Resistant | Not Static-Resistant |
| Scratch-Resistant | Scratch-Resistant |
| Product Type | Plastic Sheet |
| FDA Compliance | 21 CFR 177.1500/21 CFR 177.2500 |
| UL 752 Ballistic Rating | Not Applicable |
| Filler Material | MDS |
| Flexural Modulus | 500,000 psi |
| UV-Resistant | Not UV-Resistant |
| Fabrication | Cast |
| Light Transmission | 0 % |
| Rockwell Hardness | 110 HRM |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |