The ZORO SELECT - 1UTK4 is a clear, standard grade Sheet Stock made from PETG material. This plastic sheet comes in various sizes and thicknesses, making it versatile for different industrial applications. It can be cut, shaped or molded into different forms based on the specifications of your project.
- Corrosion and Chemical Resistance: The sheet is designed for use with certain corrosive substances and chemicals. Always refer to the product's material compatibility chart before use.
- Friction Rating: With a slippery friction rating, this product is suitable for applications where movement control and stability are essential.
- Machinability: This plastic sheet can be worked upon using industrial tools as per its machinability rating. Ensure proper tooling guidelines are followed.
- Temperature Range: The specified operating temperature range for this plastic sheet is between -40 Degrees F and 153 Degrees F. Performance outside these ranges may vary.
- Tensile Strength: This plastic sheet has a rated tensile strength of 7,700 psi (pounds per square inch). Actual performance may depend on application conditions.
| Item | Sheet Stock |
|---|---|
| Plastic Material | PETG |
| Plastic Thickness | 1/8 in |
| Plastic Width | 12 in |
| Plastic Length | 12 in |
| Plastic Color | Clear |
| Max. Temp. (F) | 153 |
| Min. Temp. (F) | -40 Degrees F |
| Color | Colorless |
| Plastic Grouping | Sheet Stock |
| Plastic Properties | Transparent |
| Material Type | Film Masked |
| Material Color Family | Clear |
| Operating Temp. Range | -40 to 153 deg F |
| Length Tolerance | +/-0.250 in |
| Thickness Tolerance | +/-10% |
| Tensile Strength | 7,700 psi |
| Width Tolerance | +/-0.25 in |
| Width | 12" |
| Length | 12" |
| Material | PETG |
| Thickness | 1/8 in |
| Shape | Square |
| Plastic Thickness Tolerance | +/-10% |
| Friction Rating | Slippery |
| Impact Strength Rating | Poor |
| Tensile Strength Rating | Good |
| Plastic Hardness | Rockwell R115 |
| Plastic Clarity | Clear |
| Corrosion and Chemical Resistance | Good |
| Impact Strength | 1.7 ft-lb/in |
| Plastic Hardness Rating | Hard |
| UV Resistant | No |
| Nominal Size | 12 in W x 12 in L |
| Water Absorption | 0.2% |
| Plastic Length Tolerance | +/-1/4 in |
| Maximum Temperature | 185 deg F |
| Machinability | 85 % |
| Plastic Width Tolerance | +/-1/4 in |
| Water Absorption Rating | Good |
| Grade | Standard |
| Wear Factor | Fair |
| Temperature Range | -40 to 153 deg F |
| Minimum Temperature | -40 deg F |
| Maximum Adhesive Temperature | 185 deg F |
| Minimum Adhesive Temperature | 122 deg F |
| Backing Type | Not Applicable |
| Plastic Density | 1.27 g/cc |
| Friction Coefficient | 0.25 |
| Standards | JL C3DP/10993-5:2009 |
| Scratch-Resistant | Not Scratch-Resistant |
| Rockwell Hardness | 115 HRR |
| Coefficient of Thermal Expansion | 66.8 x 10^-6 m/m Degrees C |
| Number of Walls | Not Applicable |
| FDA Compliance | 21 CFR 177.1315 |
| Flexural Modulus | 310,000 psi |
| Dielectric Strength | 410 V/mil |
| Wear Rate | 1.96 x 10^-8 cu mm/N-m |
| Static-Resistant | Not Static-Resistant |
| Metal Detectable | No |
| Shore Hardness | 70 Shore D |
| UV-Resistant | UV-Resistant |
| UL 752 Ballistic Rating | Not Applicable |
| Product Type | Plastic Sheet |
| Light Transmission | 86 % |
| Filler Material | Not Applicable |
| Fabrication | Extruded |
| Product Form | Sheet |
| Elongation | 15 % |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |