Acrylic Sheet, Acrylic, Grade Standard, Plastic Length 6 in, Plastic Width 6 in, Plastic Thickness 2 in, Colorless, Plastic Clarity Clear, Tensile Strength 9,000 psi, Impact Strength 0.3 ft-lb/in, Friction Coefficient 0.8, Water Absorption 0.4 Percent, Temperature Range 40 Degrees to 190 Degrees F, Plastic Density 0.043 lb/cu in, Plastic Hardness Rockwell M95
| Item | Acrylic Sheet |
|---|---|
| Plastic Material | Cast Acrylic |
| Plastic Thickness | 2 in |
| Plastic Width | 6 in |
| Plastic Length | 6 in |
| Plastic Color | Clear |
| Max. Temp. (F) | 190 |
| Min. Temp. (F) | 40 Degrees F |
| Color | Colorless |
| Length Tolerance | (-1" - +1") |
| Thickness Tolerance | -0.043" - +0" |
| Plastic Properties | Transparent |
| Tensile Strength | 9,000 psi |
| Width Tolerance | (-0.25" - +0.25") |
| Operating Temp. Range | 40 to 190 deg F |
| Thickness | 2 in |
| Material | Acrylic |
| Width | 6 in |
| Length | 6 in |
| Tensile Strength Rating | Good |
| Minimum Adhesive Temperature | Not Applicable |
| Plastic Hardness | Rockwell M95 |
| Plastic Density | 0.043 lb/cu in |
| Standards | Not Rated |
| Friction Coefficient | 0.8 |
| Shape | Square |
| Maximum Adhesive Temperature | Not Applicable |
| Impact Strength Rating | Poor |
| Water Absorption Rating | Poor |
| Water Absorption | 0.4% |
| Plastic Clarity | Clear |
| Friction Rating | Not Slippery |
| Impact Strength | 0.3 ft-lb/in |
| Backing Type | No Backing |
| Plastic Thickness Tolerance | +0.05/-0.093 in |
| Grade | Standard |
| Plastic Width Tolerance | +/-1 in |
| Plastic Hardness Rating | Hard |
| Wear Factor | Fair |
| UV Resistant | Yes |
| Machinability | Not Rated |
| Nominal Size | 6 in W x 6 in L |
| Maximum Temperature | 190 deg F |
| Temperature Range | 40 to 190 deg F |
| Corrosion and Chemical Resistance | Fair |
| Plastic Length Tolerance | +/-1 in |
| Minimum Temperature | 40 deg F |
| Light Transmission | 93 % |
| Wear Rate | Not Rated |
| Coefficient of Thermal Expansion | 6 x 10^-5 K^-1 |
| Scratch-Resistant | Not Scratch-Resistant |
| Number of Walls | Not Applicable |
| Shore Hardness | 98 Shore D |
| Elongation | Not Rated |
| Product Type | Plastic Sheet |
| UV-Resistant | UV-Resistant |
| Static-Resistant | Not Static-Resistant |
| UL 752 Ballistic Rating | Not Applicable |
| Weight | 3.1 lb |
| FDA Compliance | Not FDA Compliant |
| Flexural Modulus | Not Rated |
| Product Form | Sheet |
| Filler Material | Not Applicable |
| Fabrication | Cast |
| Metal Detectable | No |
| Rockwell Hardness | 95 HRM |
| Dielectric Strength | Not Rated |
| Country of Origin (subject to change) | Indonesia |
| Package Quantity | 1 |