Acrylic Sheet, Acrylic, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.703125 in, Colorless, Plastic Clarity Clear, Tensile Strength 10,500 psi, Impact Strength 0.4 ft-lb/in, Friction Coefficient 0, Water Absorption 0.3 Percent, Temperature Range -26 Degrees to 180 Degrees F, Plastic Density 1.2 g/cc
| Item | Sheet Stock |
|---|---|
| Plastic Material | Cast Acrylic |
| Plastic Thickness | 0.709 in |
| Plastic Width | 12 in |
| Plastic Length | 12 in |
| Plastic Color | Clear |
| Max. Temp. (F) | 180 |
| Min. Temp. (F) | -26 Degrees F |
| Color | Colorless |
| Plastic Properties | Transparent |
| Tensile Strength | 10,500 psi |
| Material Color Family | Clear |
| Operating Temp. Range | -26 to 180 deg F |
| Width Tolerance | +/-0.25 in |
| Material Type | Standard Grade |
| Length Tolerance | +/-0.250 in |
| Plastic Grouping | Sheet Stock |
| Thickness Tolerance | +/-10% |
| Thickness | 0.709 in |
| Width | 12" |
| Length | 12" |
| Material | Acrylic |
| Maximum Temperature | 180 deg F |
| Shape | Square |
| Friction Rating | Not Slippery |
| Plastic Width Tolerance | +/-1/4 in |
| Temperature Range | -26 to 180 deg F |
| Minimum Temperature | -26 deg F |
| Grade | Standard |
| Plastic Thickness Tolerance | +/-10% |
| Tensile Strength Rating | Excellent |
| Nominal Size | 12 in W x 12 in L |
| Plastic Clarity | Clear |
| Plastic Hardness Rating | Hard |
| Corrosion and Chemical Resistance | Fair |
| Plastic Length Tolerance | +/-1/4 in |
| Wear Factor | Fair |
| Water Absorption Rating | Good |
| Machinability | 80 % |
| UV Resistant | Yes |
| Impact Strength | 0.4 ft-lb/in |
| Friction Coefficient | 0 |
| Plastic Density | 1.2 g/cc |
| Maximum Adhesive Temperature | 400 deg F |
| Backing Type | Acrylic Adhesive |
| Minimum Adhesive Temperature | -20 deg F |
| Water Absorption | 0.3% |
| Standards | ASTM D638, UL 94 |
| Product Form | Sheet |
| UL 752 Ballistic Rating | Not Applicable |
| Product Type | Plastic Sheet |
| Fabrication | Cast |
| Light Transmission | 92 % |
| UV-Resistant | UV-Resistant |
| Flexural Modulus | 350,000 psi |
| Dielectric Strength | 400 V/mil |
| Wear Rate | 1.40 x 10^-5 cu mm/N-m |
| Filler Material | Not Applicable |
| Scratch-Resistant | Scratch-Resistant |
| Static-Resistant | Not Static-Resistant |
| Number of Walls | Not Applicable |
| Rockwell Hardness | 95 HRM |
| Metal Detectable | No |
| Elongation | 5 % |
| Coefficient of Thermal Expansion | 5 x 10^-5 in/in/ Degrees F |
| Shore Hardness | 70 Shore D |
| FDA Compliance | 21 CFR 177.1010 |
| Country of Origin (subject to change) | Multiple |
| Package Quantity | 1 |